6.3. Operations#

6.3.1. Initializing RTEMS#

The Initialization Manager rtems_initialize_executive() directives is called by the boot_card() routine which is invoked by the Board Support Package once a basic C run-time environment is set up. This consists of

a valid and accessible text section, read-only data, read-write data and zero-initialized data,
an initialization stack large enough to initialize the rest of the Board Support Package, RTEMS and the device drivers,
all registers and components mandated by Application Binary Interface, and
disabled interrupts.

The rtems_initialize_executive() directive uses a system initialization linker set to initialize only those parts of the overall RTEMS feature set that is necessary for a particular application. Each RTEMS feature used the application may optionally register an initialization handler. The system initialization API is available via #included <rtems/sysinit.h>.

A list of all initialization steps follows. Some steps are optional depending on the requested feature set of the application. The initialization steps are execute in the order presented here.

RTEMS_SYSINIT_RECORD: Initialization of the event recording is the first initialization step. This allows to record the further system initialization. This step is optional and depends on the CONFIGURE_RECORD_PER_PROCESSOR_ITEMS configuration option.
RTEMS_SYSINIT_BSP_EARLY: The Board Support Package may perform an early platform initialization in this step. This step is optional.
RTEMS_SYSINIT_MEMORY: The Board Support Package should initialize everything so that calls to _Memory_Get() can be made after this step. This step is optional.
RTEMS_SYSINIT_DIRTY_MEMORY: The free memory is dirtied in this step. This step is optional and depends on the BSP_DIRTY_MEMORY BSP option.
RTEMS_SYSINIT_ISR_STACK: The stack checker initializes the ISR stacks in this step. This step is optional and depends on the CONFIGURE_STACK_CHECKER_ENABLED configuration option.
RTEMS_SYSINIT_PER_CPU_DATA: The per-CPU data is initialized in this step. This step is mandatory.
RTEMS_SYSINIT_SBRK: The Board Support Package may initialize the sbrk() support in this step. This step is optional.
RTEMS_SYSINIT_WORKSPACE: The workspace is initialized in this step. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_MALLOC: The C program heap is initialized in this step. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_BSP_START: The Board Support Package should perform a general platform initialization in this step (e.g. interrupt controller initialization). This step is mandatory.
RTEMS_SYSINIT_CPU_COUNTER: Initialization of the CPU counter hardware and support functions. The CPU counter is initialized early to allow its use in the tracing and profiling of the system initialization sequence. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_INITIAL_EXTENSIONS: Registers the initial extensions. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_MP_EARLY: In MPCI configurations, an early MPCI initialization is performed in this step. This step is mandatory in MPCI configurations.
RTEMS_SYSINIT_DATA_STRUCTURES: This directive is called when the Board Support Package has completed its basic initialization and allows RTEMS to initialize the application environment based upon the information in the Configuration Table, User Initialization Tasks Table, Device Driver Table, User Extension Table, Multiprocessor Configuration Table, and the Multiprocessor Communications Interface (MPCI) Table.
RTEMS_SYSINIT_MP: In MPCI configurations, a general MPCI initialization is performed in this step. This step is mandatory in MPCI configurations.
RTEMS_SYSINIT_USER_EXTENSIONS: Initialization of the User Extensions object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_TASKS: Initialization of the Classic Tasks object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_TASKS_MP: In MPCI configurations, the Classic Tasks MPCI support is initialized in this step. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_TIMER: Initialization of the Classic Timer object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SIGNAL: Initialization of the Classic Signal support. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SIGNAL_MP: In MPCI configurations, the Classic Signal MPCI support is initialized in this step. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_EVENT: Initialization of the Classic Event support. This step is optional and depends on the application configuration. This step is only used on MPCI configurations.
RTEMS_SYSINIT_CLASSIC_EVENT_MP: In MPCI configurations, the Classic Event MPCI support is initialized in this step. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_MESSAGE_QUEUE: Initialization of the Classic Message Queue object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SEMAPHORE: Initialization of the Classic Semaphore object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_SEMAPHORE_MP: In MPCI configurations, the Classic Semaphore MPCI support is initialized in this step. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_PARTITION: Initialization of the Classic Partition object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_PARTITION_MP: In MPCI configurations, the Classic Partition MPCI support is initialized in this step. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_REGION: Initialization of the Classic Region object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_DUAL_PORTED_MEMORY: Initialization of the Classic Dual-Ported Memory object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_RATE_MONOTONIC: Initialization of the Classic Rate-Monotonic object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_CLASSIC_BARRIER: Initialization of the Classic Barrier object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_SIGNALS: Initialization of the POSIX Signals support. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_THREADS: Initialization of the POSIX Threads object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_MESSAGE_QUEUE: Initialization of the POSIX Message Queue object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_SEMAPHORE: Initialization of the POSIX Semaphore object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_TIMER: Initialization of the POSIX Timer object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_SHM: Initialization of the POSIX Shared Memory object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_KEYS: Initialization of the POSIX Keys object class. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_CLEANUP: Initialization of the POSIX Cleanup support. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_IDLE_THREADS: Initialization of idle threads. This step is mandatory.
RTEMS_SYSINIT_LIBIO: Initialization of IO library. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_ROOT_FILESYSTEM: Initialization of the root filesystem. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_DRVMGR: Driver manager initialization. This step is optional and depends on the application configuration. Only available if the driver manager is enabled.
RTEMS_SYSINIT_MP_SERVER: In MPCI configurations, the MPCI server is initialized in this step. This step is mandatory in MPCI configurations.
RTEMS_SYSINIT_BSP_PRE_DRIVERS: Initialization step performed right before device drivers are initialized. This step is mandatory.
RTEMS_SYSINIT_DRVMGR_LEVEL_1: Driver manager level 1 initialization. This step is optional and depends on the application configuration. Only available if the driver manager is enabled.
RTEMS_SYSINIT_DEVICE_DRIVERS: This step initializes all statically configured device drivers and performs all RTEMS initialization which requires device drivers to be initialized. This step is mandatory. In a multiprocessor configuration, this service will initialize the Multiprocessor Communications Interface (MPCI) and synchronize with the other nodes in the system.
RTEMS_SYSINIT_DRVMGR_LEVEL_2: Driver manager level 2 initialization. This step is optional and depends on the application configuration. Only available if the driver manager is enabled.
RTEMS_SYSINIT_DRVMGR_LEVEL_3: Driver manager level 3 initialization. This step is optional and depends on the application configuration. Only available if the driver manager is enabled.
RTEMS_SYSINIT_DRVMGR_LEVEL_4: Driver manager level 4 initialization. This step is optional and depends on the application configuration. Only available if the driver manager is enabled.
RTEMS_SYSINIT_MP_FINALIZE: Finalize MPCI initialization. This step is mandatory on MPCI configurations.
RTEMS_SYSINIT_CLASSIC_USER_TASKS: Creates and starts the Classic initialization tasks. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_POSIX_USER_THREADS: Creates POSIX initialization threads. This step is optional and depends on the application configuration.
RTEMS_SYSINIT_STD_FILE_DESCRIPTORS: Open the standard input, output and error file descriptors. This step is optional and depends on the application configuration.

The final action of the rtems_initialize_executive() directive is to start multitasking and switch to the highest priority ready thread. RTEMS does not return to the initialization context and the initialization stack may be re-used for interrupt processing.

Many of RTEMS actions during initialization are based upon the contents of the Configuration Table. For more information regarding the format and contents of this table, please refer to the chapter Configuring a System.

6.3.2. Global Construction#

The global construction is carried out by the Classic API initialization task. If no Classic API initialization task exists, then it is carried out by the POSIX API initialization thread. If no initialization task or thread exists, then no global construction is performed. The Classic API task or POSIX API thread which carries out global construction is called the main thread. For configuration options related to initialization tasks, see CONFIGURE_RTEMS_INIT_TASKS_TABLE, CONFIGURE_POSIX_INIT_THREAD_TABLE, and CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION.

Global construction runs before the task entry of the main thread. The configuration of the main thread must take the global construction into account. In particular, the main thread stack size, priority, attributes and initial modes must be set accordingly. Thread-local objects and POSIX key values created during global construction are accessible by the main thread. If other initialization tasks are configured, and one of them has a higher priority than the main thread and the main thread is preemptible, this task executes before the global construction. In case the main thread blocks during global construction, then other tasks may run. In SMP configurations, other initialization tasks may run in parallel with global construction. Tasks created during global construction may preempt the main thread or run in parallel in SMP configurations. All RTEMS services allowed in task context are allowed during global construction.

Global constructors are C++ global object constructors or functions with the constructor attribute. For example, the following test program

#include <stdio.h>
#include <assert.h>

class A {
  public:
    A()
    {
      puts( "A:A()" );
    }
};

static A a;

static thread_local int i;

static thread_local int j;

static __attribute__(( __constructor__ )) void b( void )
{
  i = 1;
  puts( "b()" );
}

static __attribute__(( __constructor__( 1000 ) )) void c( void )
{
  puts( "c()" );
}

int main( void )
{
  assert( i == 1 );
  assert( j == 0 );
  return 0;
}

should output:

c()
b()
A:A()

Operations

Contents

6.3. Operations#

6.3.1. Initializing RTEMS#

6.3.2. Global Construction#