#include "chip.h"
#include <assert.h>
#include <string.h>

Functions
void	USART_SetBaudrate (Usart *pUsart, uint8_t OverSamp, uint32_t baudrate, uint32_t masterClock)
	Configures an USART baudrate. More...

void	USART_Configure (Usart *pUsart, uint32_t mode, uint32_t baudrate, uint32_t masterClock)
	Configures an USART peripheral with the specified parameters. More...

void	USART_SetTransmitterEnabled (Usart *pUsart, uint8_t enabled)
	Enables or disables the transmitter of an USART peripheral. More...

void	USART_DisableRx (Usart *pUsart)
	Disables the Receiver of an USART peripheral. More...

void	USART_DisableTx (Usart *pUsart)
	Disables the transmitter of an USART peripheral. More...

void	USART_EnableRx (Usart *pUsart)
	Enables the Receiver of an USART peripheral. More...

void	USART_EnableTx (Usart *pUsart)
	Enables the transmitter of an USART peripheral. More...

void	USART_ResetRx (Usart *pUsart)
	Resets or disables the Receiver of an USART peripheral. More...

void	USART_ResetTx (Usart *pUsart)
	resets and disables the transmitter of an USART peripheral. More...

void	USART_SetReceiverEnabled (Usart *pUsart, uint8_t enabled)
	Enables or disables the receiver of an USART peripheral. More...

void	USART_SetRTSEnabled (Usart *pUsart, uint8_t enabled)
	Enables or disables the Request To Send (RTS) of an USART peripheral. More...

void	USART_Write (Usart *pUsart, uint16_t data, volatile uint32_t timeOut)
	Sends one packet of data through the specified USART peripheral. This function operates synchronously, so it only returns when the data has been actually sent. More...

uint16_t	USART_Read (Usart *pUsart, volatile uint32_t timeOut)
	Reads and return a packet of data on the specified USART peripheral. This function operates asynchronously, so it waits until some data has been received. More...

uint8_t	USART_IsDataAvailable (Usart *pUsart)
	Returns 1 if some data has been received and can be read from an USART; otherwise returns 0. More...

void	USART_PutChar (Usart *pUsart, uint8_t c)
	Sends one packet of data through the specified USART peripheral. This function operates synchronously, so it only returns when the data has been actually sent. More...

uint32_t	USART_IsRxReady (Usart *pUsart)
	Return 1 if a character can be read in USART. More...

uint32_t	USART_GetStatus (Usart *pUsart)
	Get present status. More...

void	USART_EnableIt (Usart *pUsart, uint32_t mode)
	Enable interrupt. More...

void	USART_DisableIt (Usart *pUsart, uint32_t mode)
	Disable interrupt. More...

uint32_t	USART_GetItMask (Usart *pUsart)
	Return interrupt mask. More...

uint8_t	USART_GetChar (Usart *pUsart)
	Reads and returns a character from the USART. More...

void	USART_EnableRecvTimeOut (Usart *pUsart, uint32_t Timeout)
	Enable Rx Timeout for USART. More...

void	USART_EnableTxTimeGaurd (Usart *pUsart, uint32_t TimeGaurd)
	Enable Tx Timeout for USART. More...

void	USART_AcknowledgeRxTimeOut (Usart *pUsart, uint8_t Periodic)
	Acknowledge Rx timeout and sets to Idle or periodic repetitive state. More...

Detailed Description

Implementation of USART (Universal Synchronous Asynchronous Receiver Transmitter) controller.

Function Documentation

◆ USART_AcknowledgeRxTimeOut()

void USART_AcknowledgeRxTimeOut	(	Usart *	pUsart,
		uint8_t	Periodic
	)

Acknowledge Rx timeout and sets to Idle or periodic repetitive state.

Parameters

pUsart	Pointer to an USART peripheral.
Periodic	If timeout is periodic or should wait for new char

Returns: None

◆ USART_Configure()

void USART_Configure	(	Usart *	pUsart,
		uint32_t	mode,
		uint32_t	baudrate,
		uint32_t	masterClock
	)

Configures an USART peripheral with the specified parameters.

Parameters

pUsart	Pointer to the USART peripheral to configure.
mode	Desired value for the USART mode register (see the datasheet).
baudrate	Baudrate at which the USART should operate (in Hz).
masterClock	Frequency of the system master clock (in Hz).

◆ USART_DisableIt()

void USART_DisableIt	(	Usart *	pUsart,
		uint32_t	mode
	)

Disable interrupt.

Parameters

pUsart	Pointer to an USART peripheral.
mode	Interrupt mode.

◆ USART_DisableRx()

void USART_DisableRx ( Usart * pUsart )

Disables the Receiver of an USART peripheral.

Parameters

pUsart Pointer to an USART peripheral

◆ USART_DisableTx()

void USART_DisableTx ( Usart * pUsart )

Disables the transmitter of an USART peripheral.

Parameters

pUsart Pointer to an USART peripheral

◆ USART_EnableIt()

void USART_EnableIt	(	Usart *	pUsart,
		uint32_t	mode
	)

Enable interrupt.

Parameters

pUsart	Pointer to an USART peripheral.
mode	Interrupt mode.

◆ USART_EnableRecvTimeOut()

void USART_EnableRecvTimeOut	(	Usart *	pUsart,
		uint32_t	Timeout
	)

Enable Rx Timeout for USART.

Parameters

pUsart	Pointer to an USART peripheral.
Timeout	Timeout value

Returns: None

◆ USART_EnableRx()

void USART_EnableRx ( Usart * pUsart )

Enables the Receiver of an USART peripheral.

Parameters

pUsart Pointer to an USART peripheral

◆ USART_EnableTx()

void USART_EnableTx ( Usart * pUsart )

Enables the transmitter of an USART peripheral.

Parameters

pUsart Pointer to an USART peripheral

◆ USART_EnableTxTimeGaurd()

void USART_EnableTxTimeGaurd	(	Usart *	pUsart,
		uint32_t	TimeGaurd
	)

Enable Tx Timeout for USART.

Parameters

pUsart	Pointer to an USART peripheral.
TimeGaurd	TimeGaurd value

Returns: None

◆ USART_GetChar()

uint8_t USART_GetChar ( Usart * pUsart )

Reads and returns a character from the USART.

Note: This function is synchronous (i.e. uses polling).

Parameters

pUsart Pointer to an USART peripheral.

Returns: Character received.

◆ USART_GetItMask()

uint32_t USART_GetItMask ( Usart * pUsart )

Return interrupt mask.

Parameters

pUsart Pointer to an USART peripheral.

◆ USART_GetStatus()

uint32_t USART_GetStatus ( Usart * pUsart )

Get present status.

Parameters

pUsart Pointer to an USART peripheral.

◆ USART_IsDataAvailable()

uint8_t USART_IsDataAvailable ( Usart * pUsart )

Returns 1 if some data has been received and can be read from an USART; otherwise returns 0.

Parameters

pUsart Pointer to an USART instance.

◆ USART_IsRxReady()

uint32_t USART_IsRxReady ( Usart * pUsart )

Return 1 if a character can be read in USART.

Parameters

pUsart Pointer to an USART peripheral.

◆ USART_PutChar()

void USART_PutChar	(	Usart *	pUsart,
		uint8_t	c
	)

Sends one packet of data through the specified USART peripheral. This function operates synchronously, so it only returns when the data has been actually sent.

Parameters

pUsart	Pointer to an USART peripheral.
c	Character to send

◆ USART_Read()

uint16_t USART_Read	(	Usart *	pUsart,
		volatile uint32_t	timeOut
	)

Reads and return a packet of data on the specified USART peripheral. This function operates asynchronously, so it waits until some data has been received.

Parameters

pUsart	Pointer to an USART peripheral.
timeOut	Time out value (0 -> no timeout).

◆ USART_ResetRx()

void USART_ResetRx ( Usart * pUsart )

Resets or disables the Receiver of an USART peripheral.

Parameters

pUsart Pointer to an USART peripheral

◆ USART_ResetTx()

void USART_ResetTx ( Usart * pUsart )

resets and disables the transmitter of an USART peripheral.

Parameters

pUsart Pointer to an USART peripheral

◆ USART_SetBaudrate()

void USART_SetBaudrate	(	Usart *	pUsart,
		uint8_t	OverSamp,
		uint32_t	baudrate,
		uint32_t	masterClock
	)

Configures an USART baudrate.

Parameters

pUsart	Pointer to the USART peripheral to configure.
baudrate	Baudrate at which the USART should operate (in Hz).
masterClock	Frequency of the system master clock (in Hz).

◆ USART_SetReceiverEnabled()

void USART_SetReceiverEnabled	(	Usart *	pUsart,
		uint8_t	enabled
	)

Enables or disables the receiver of an USART peripheral.

Parameters

pUsart	Pointer to an USART peripheral
enabled	If true, the receiver is enabled; otherwise it is disabled.

◆ USART_SetRTSEnabled()

void USART_SetRTSEnabled	(	Usart *	pUsart,
		uint8_t	enabled
	)

Enables or disables the Request To Send (RTS) of an USART peripheral.

Parameters

pUsart	Pointer to an USART peripheral
enabled	If true, the RTS is enabled (0); otherwise it is disabled.

◆ USART_SetTransmitterEnabled()

void USART_SetTransmitterEnabled	(	Usart *	pUsart,
		uint8_t	enabled
	)

Enables or disables the transmitter of an USART peripheral.

Parameters

pUsart	Pointer to an USART peripheral
enabled	If true, the transmitter is enabled; otherwise it is disabled.

◆ USART_Write()

void USART_Write	(	Usart *	pUsart,
		uint16_t	data,
		volatile uint32_t	timeOut
	)

Sends one packet of data through the specified USART peripheral. This function operates synchronously, so it only returns when the data has been actually sent.

Parameters

pUsart	Pointer to an USART peripheral.
data	Data to send including 9nth bit and sync field if necessary (in the same format as the US_THR register in the datasheet).
timeOut	Time out value (0 = no timeout).

Functions

Detailed Description

Function Documentation

◆ USART_AcknowledgeRxTimeOut()

◆ USART_Configure()

◆ USART_DisableIt()

◆ USART_DisableRx()

◆ USART_DisableTx()

◆ USART_EnableIt()

◆ USART_EnableRecvTimeOut()

◆ USART_EnableRx()

◆ USART_EnableTx()

◆ USART_EnableTxTimeGaurd()

◆ USART_GetChar()

◆ USART_GetItMask()

◆ USART_GetStatus()

◆ USART_IsDataAvailable()

◆ USART_IsRxReady()

◆ USART_PutChar()

◆ USART_Read()

◆ USART_ResetRx()

◆ USART_ResetTx()

◆ USART_SetBaudrate()

◆ USART_SetReceiverEnabled()

◆ USART_SetRTSEnabled()

◆ USART_SetTransmitterEnabled()

◆ USART_Write()