m340uart.h

Go to the documentation of this file.

/*
 *  Header file for console driver
 *  defines for accessing M68340/68349 UART registers
 *
 *  Author:
 *  Geoffroy Montel
 *  France Telecom - CNET/DSM/TAM/CAT
 *  4, rue du Clos Courtel
 *  35512 CESSON-SEVIGNE
 *  FRANCE
 *
 *  e-mail: g_montel@yahoo.com
 *
 *
 *  COPYRIGHT (c) 1989-2008.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.rtems.org/license/LICENSE.
 */

#ifndef __m340uart_H__
#define __m340uart_H__

#include <sys/types.h>

/* UART initialisation */
#define UART_CHANNEL_A          0
#define UART_CHANNEL_B          1
#define UART_NUMBER_OF_CHANNELS     2
#define UART_CONSOLE_NAME       "/dev/console"
#define UART_RAW_IO_NAME        "/dev/tty1"
#define UART_FIFO_FULL          0
#define UART_CRR            1
#define UART_INTERRUPTS         0
#define UART_POLLING            1
#define UART_TERMIOS_CONSOLE        0
#define UART_TERMIOS_RAW        1
#define UART_TERMIOS_MIN_DEFAULT    1
#define UART_TERMIOS_TIME_DEFAULT   0

void Init_UART_Table(void);

typedef struct {
        uint8_t             enable;
        uint16_t            rx_buffer_size; /* NOT IMPLEMENTED */
        uint16_t            tx_buffer_size; /* NOT IMPLEMENTED */
           } uart_termios_config;

typedef struct { /* for one channel */
        uint8_t             enable;     /* use this channel */
        char            name[64];   /* use UART_CONSOLE_NAME for console purpose */
        uint8_t             parity_mode;    /* parity mode, see MR1 section for defines */
        uint8_t             bits_per_char;  /* bits per character, see MR1 section for defines  */
        float           rx_baudrate;    /* Rx baudrate */
        float           tx_baudrate;    /* Tx baudrate */
        uint8_t             rx_mode;    /* FIFO Full (UART_FIFO_FULL) or ChannelReceiverReady (UART_CRR) */
        uint8_t             mode;       /* use interrupts (UART_INTERRUPTS) or polling (UART_POLLING) */
        uart_termios_config termios;
           } uart_channel_config;

extern uart_channel_config      m340_uart_config[UART_NUMBER_OF_CHANNELS];

typedef  struct {
         int    set;    /* number of the m340 baud speed set */
         int    rcs;    /* RCS for the needed baud set */
         int    tcs;    /* TCS for the needed baud set */
        } t_baud_speed;

typedef  struct {
         t_baud_speed   baud_speed_table[2];
         short      nb;
        } t_baud_speed_table;

extern t_baud_speed_table
Find_Right_m340_UART_Config(float ChannelA_ReceiverBaudRate, float ChannelA_TransmitterBaudRate, uint8_t         enableA,
                float ChannelB_ReceiverBaudRate, float ChannelB_TransmitterBaudRate, uint8_t         enableB);

extern rtems_isr InterruptHandler (rtems_vector_number v);

extern int dbugRead (int minor);
extern ssize_t dbugWrite (int minor, const char *buf, size_t len);

extern float m340_Baud_Rates_Table[16][2];

/*  SR */
#define m340_Rx_RDY     1
#define m340_FFULL      (1<<1)
#define m340_Tx_RDY     (1<<2)
#define m340_TxEMP      (1<<3)
#define m340_OE         (1<<4)
#define m340_PE         (1<<5)
#define m340_FE         (1<<6)
#define m340_RB         (1<<7)

/*  IER */
#define m340_TxRDYA     1
#define m340_RxRDYA     (1<<1)
#define m340_TxRxRDYA       0x3
#define m340_TxRDYB     (1<<4)
#define m340_RxRDYB     (1<<5)
#define m340_TxRxRDYB       0x30

/*  CR */
#define m340_Reset_Error_Status 0x40
#define m340_Reset_Receiver 0x20
#define m340_Reset_Transmitter  0x30
#define m340_Transmitter_Enable (1<<2)
#define m340_Receiver_Enable    1
#define m340_Transmitter_Disable (2<<2)
#define m340_Receiver_Disable   2

/*  ACR */
#define m340_BRG_Set1       0
#define m340_BRG_Set2       (1<<7)

/*  OPCR */
#define m340_OPCR_Gal       0x0
#define m340_OPCR_Aux       0xFF

/*  ISR */
#define m340_COS        (1<<7)
#define m340_DBB        (1<<6)
#define m340_XTAL_RDY       (1<<3)
#define m340_DBA        (1<<2)

/*  MR1 */
#define m340_RxRTS      (1<<7)
#define m340_R_F        (1<<6)      /* character or block mode */
#define m340_ERR        (1<<5)
#define m340_RxRTX      (1<<7)
#define m340_Even_Parity    0
#define m340_Odd_Parity     (1<<2)
#define m340_Low_Parity     (2<<2)
#define m340_High_Parity    (3<<2)
#define m340_No_Parity      (4<<2)
#define m340_Data_Character (6<<2)
#define m340_Address_Character  (7<<2)
#define m340_5bpc       0x0
#define m340_6bpc       0x1
#define m340_7bpc       0x2
#define m340_8bpc       0x3

/*  MR2 */
#define m340_normal     (0<<6)
#define m340_automatic_echo (1<<6)
#define m340_local_loopback (2<<6)
#define m340_remote_loopback    (3<<6)
#define m340_TxRTS      (1<<5)
#define m340_TxCTS      (1<<4)

/* Baud rates for Transmitter/Receiver */
#define SCLK    1       /* put your own SCLK value here */

#endif