bsp.h File Reference

Global BSP definitions. More...

#include <bspopts.h>
#include <bsp/default-initial-extension.h>
#include <bsp/tblsizes.h>
#include <rtems.h>
#include <rtems/score/cpu.h>
#include <rtems/bspIo.h>

Go to the source code of this file.

Macros
#define	BSP_HAS_FRAME_BUFFER   1
#define	BSP_NE2000_NETWORK_DRIVER_NAME   "ne1"
#define	BSP_NE2000_NETWORK_DRIVER_ATTACH   rtems_ne_driver_attach
#define	BSP_WD8003_NETWORK_DRIVER_NAME   "wd1"
#define	BSP_WD8003_NETWORK_DRIVER_ATTACH   rtems_wd_driver_attach
#define	BSP_DEC21140_NETWORK_DRIVER_NAME   "dc1"
#define	BSP_DEC21140_NETWORK_DRIVER_ATTACH   rtems_dec21140_driver_attach
#define	BSP_3C509_NETWORK_DRIVER_NAME   "3c1"
#define	BSP_3C509_NETWORK_DRIVER_ATTACH   rtems_3c509_driver_attach
#define	RTEMS_BSP_NETWORK_DRIVER_NAME   BSP_DEC21140_NETWORK_DRIVER_NAME
#define	RTEMS_BSP_NETWORK_DRIVER_ATTACH   BSP_DEC21140_NETWORK_DRIVER_ATTACH
#define	IO_TIMER1   0x40
#define	TIMER_CNTR0   (IO_TIMER1 + 0) /* timer 0 counter port */
#define	TIMER_CNTR1   (IO_TIMER1 + 1) /* timer 1 counter port */
#define	TIMER_CNTR2   (IO_TIMER1 + 2) /* timer 2 counter port */
#define	TIMER_MODE   (IO_TIMER1 + 3) /* timer mode port */
#define	TIMER_SEL0   0x00 /* select counter 0 */
#define	TIMER_SEL1   0x40 /* select counter 1 */
#define	TIMER_SEL2   0x80 /* select counter 2 */
#define	TIMER_INTTC   0x00 /* mode 0, intr on terminal cnt */
#define	TIMER_ONESHOT   0x02 /* mode 1, one shot */
#define	TIMER_RATEGEN   0x04 /* mode 2, rate generator */
#define	TIMER_SQWAVE   0x06 /* mode 3, square wave */
#define	TIMER_SWSTROBE   0x08 /* mode 4, s/w triggered strobe */
#define	TIMER_HWSTROBE   0x0a /* mode 5, h/w triggered strobe */
#define	TIMER_LATCH   0x00 /* latch counter for reading */
#define	TIMER_LSB   0x10 /* r/w counter LSB */
#define	TIMER_MSB   0x20 /* r/w counter MSB */
#define	TIMER_16BIT   0x30 /* r/w counter 16 bits, LSB first */
#define	TIMER_BCD   0x01 /* count in BCD */
#define	TIMER_RD_BACK   0xc0 /* Read Back Command */
#define	RB_NOT_COUNT   0x40 /* Don't select counter latch */
#define	RB_NOT_STATUS   0x20 /* Don't select status latch */
#define	RB_COUNT_0   0x02 /* Counter 0 latch */
#define	RB_COUNT_1   0x04 /* Counter 1 latch */
#define	RB_COUNT_2   0x08 /* Counter 2 latch */
#define	RB_OUTPUT   0x80 /* Output of the counter is 1 */
#define	TIMER_TICK   1193182 /* The internal tick rate in ticks per second */
#define	BSP_CONSOLE_VGA   0
#define	BSP_CONSOLE_COM1   1
#define	BSP_CONSOLE_COM2   2
#define	US_TO_TICK(us)   (((us)*105+44)/88)
#define	TICK_TO_US(tk)   (((tk)*88+52)/105)
#define	BSP_IDLE_TASK_BODY   bsp_idle_thread
#define	BSP_CONSOLE_PORT_CONSOLE   (-1)
#define	BSP_CONSOLE_PORT_COM1   (BSP_UART_COM1)
#define	BSP_CONSOLE_PORT_COM2   (BSP_UART_COM2)
#define	BSP_MAXIMUM_DEVICES   6

Typedefs
typedef __FILE	FILE

Functions
void	BSP_runtime_console_select (int *pPrintkPort, int *pConsolePort)
int	rtems_ne_driver_attach (struct rtems_bsdnet_ifconfig *, int)
int	rtems_wd_driver_attach (struct rtems_bsdnet_ifconfig *, int)
int	rtems_dec21140_driver_attach (struct rtems_bsdnet_ifconfig *, int)
int	rtems_3c509_driver_attach (struct rtems_bsdnet_ifconfig *config)
void	_IBMPC_initVideo (void)
void	_IBMPC_outch (char)
char	_IBMPC_inch (void)
char	_IBMPC_inch_sleep (void)
int	BSP_wait_polled_input (void)
int	rtems_kbpoll (void)
int	getch (void)
void	add_to_queue (unsigned short b)
void	Wait_X_ms (unsigned int timeToWait)
void	Calibrate_loop_1ms (void)
void	rtems_irq_mngt_init (void)
void	Clock_driver_install_handler (void)
void	Clock_driver_support_initialize_hardware (void)
void *	bsp_idle_thread (uintptr_t ignored)
	Optimized idle task. More...
void	kbd_reset_setup (char *str, int *ints)
size_t	read_aux (char *buffer, size_t count)
bool	bsp_get_serial_mouse_device (const char **name, const char **type)
void	register_leds (int console, unsigned int led, unsigned int *addr, unsigned int mask)
const char *	bsp_cmdline (void)
const char *	bsp_cmdline_arg (const char *arg)
void	init_remote_gdb (void)
void	i386_stub_glue_init (int uart)
void	i386_stub_glue_init_breakin (void)
int	i386_stub_glue_uart (void)
void	breakpoint (void)
uint32_t	BSP_irq_count_dump (FILE *f)
void	raw_idt_notify (void)
void	C_dispatch_isr (int vector)

Variables
interrupt_gate_descriptor	Interrupt_descriptor_table [IDT_SIZE]
segment_descriptors	_Global_descriptor_table [GDT_SIZE]

Detailed Description

Global BSP definitions.