iom103.h

Go to the documentation of this file.

/*
 *  Copyright (c) 2002, Marek Michalkiewicz
 *  All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *    distribution.
 *
 *  * Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _AVR_IOM103_H_
#define _AVR_IOM103_H_ 1

#ifndef _AVR_IO_H_
#  error "Include <avr/io.h> instead of this file."
#endif

#ifndef _AVR_IOXXX_H_
#  define _AVR_IOXXX_H_ "iom103.h"
#else
#  error "Attempt to include more than one <avr/ioXXX.h> file."
#endif

/* I/O registers */

/* Input Pins, Port F */
#define PINF    _SFR_IO8(0x00)

/* Input Pins, Port E */
#define PINE    _SFR_IO8(0x01)

/* Data Direction Register, Port E */
#define DDRE    _SFR_IO8(0x02)

/* Data Register, Port E */
#define PORTE   _SFR_IO8(0x03)

/* ADC Data Register */
#ifndef __ASSEMBLER__
#define ADC     _SFR_IO16(0x04)
#endif
#define ADCW    _SFR_IO16(0x04)
#define ADCL    _SFR_IO8(0x04)
#define ADCH    _SFR_IO8(0x05)

/* ADC Control and status register */
#define ADCSR   _SFR_IO8(0x06)

/* ADC Multiplexer select */
#define ADMUX   _SFR_IO8(0x07)

/* Analog Comparator Control and Status Register */
#define ACSR    _SFR_IO8(0x08)

/* UART Baud Rate Register */
#define UBRR    _SFR_IO8(0x09)

/* UART Control Register */
#define UCR     _SFR_IO8(0x0A)

/* UART Status Register */
#define USR     _SFR_IO8(0x0B)

/* UART I/O Data Register */
#define UDR     _SFR_IO8(0x0C)

/* SPI Control Register */
#define SPCR    _SFR_IO8(0x0D)

/* SPI Status Register */
#define SPSR    _SFR_IO8(0x0E)

/* SPI I/O Data Register */
#define SPDR    _SFR_IO8(0x0F)

/* Input Pins, Port D */
#define PIND    _SFR_IO8(0x10)

/* Data Direction Register, Port D */
#define DDRD    _SFR_IO8(0x11)

/* Data Register, Port D */
#define PORTD   _SFR_IO8(0x12)

/* Data Register, Port C */
#define PORTC   _SFR_IO8(0x15)

/* Input Pins, Port B */
#define PINB    _SFR_IO8(0x16)

/* Data Direction Register, Port B */
#define DDRB    _SFR_IO8(0x17)

/* Data Register, Port B */
#define PORTB   _SFR_IO8(0x18)

/* Input Pins, Port A */
#define PINA    _SFR_IO8(0x19)

/* Data Direction Register, Port A */
#define DDRA    _SFR_IO8(0x1A)

/* Data Register, Port A */
#define PORTA   _SFR_IO8(0x1B)

/* EEPROM Control Register */
#define EECR    _SFR_IO8(0x1C)

/* EEPROM Data Register */
#define EEDR    _SFR_IO8(0x1D)

/* EEPROM Address Register */
#define EEAR    _SFR_IO16(0x1E)
#define EEARL   _SFR_IO8(0x1E)
#define EEARH   _SFR_IO8(0x1F)

/* Watchdog Timer Control Register */
#define WDTCR   _SFR_IO8(0x21)

/* Timer2 Output Compare Register */
#define OCR2    _SFR_IO8(0x23)

/* Timer/Counter 2 */
#define TCNT2   _SFR_IO8(0x24)

/* Timer/Counter 2 Control register */
#define TCCR2   _SFR_IO8(0x25)

/* T/C 1 Input Capture Register */
#define ICR1    _SFR_IO16(0x26)
#define ICR1L   _SFR_IO8(0x26)
#define ICR1H   _SFR_IO8(0x27)

/* Timer/Counter1 Output Compare Register B */
#define OCR1B   _SFR_IO16(0x28)
#define OCR1BL  _SFR_IO8(0x28)
#define OCR1BH  _SFR_IO8(0x29)

/* Timer/Counter1 Output Compare Register A */
#define OCR1A   _SFR_IO16(0x2A)
#define OCR1AL  _SFR_IO8(0x2A)
#define OCR1AH  _SFR_IO8(0x2B)

/* Timer/Counter 1 */
#define TCNT1   _SFR_IO16(0x2C)
#define TCNT1L  _SFR_IO8(0x2C)
#define TCNT1H  _SFR_IO8(0x2D)

/* Timer/Counter 1 Control and Status Register */
#define TCCR1B  _SFR_IO8(0x2E)

/* Timer/Counter 1 Control Register */
#define TCCR1A  _SFR_IO8(0x2F)

/* Timer/Counter 0 Asynchronous Control & Status Register */
#define ASSR    _SFR_IO8(0x30)

/* Output Compare Register 0 */
#define OCR0    _SFR_IO8(0x31)

/* Timer/Counter 0 */
#define TCNT0   _SFR_IO8(0x32)

/* Timer/Counter 0 Control Register */
#define TCCR0   _SFR_IO8(0x33)

/* MCU Status Register */
#define MCUSR   _SFR_IO8(0x34)

/* MCU general Control Register */
#define MCUCR   _SFR_IO8(0x35)

/* Timer/Counter Interrupt Flag Register */
#define TIFR    _SFR_IO8(0x36)

/* Timer/Counter Interrupt MaSK register */
#define TIMSK   _SFR_IO8(0x37)

/* �xternal Interrupt Flag Register */
#define EIFR    _SFR_IO8(0x38)

/* External Interrupt MaSK register */
#define EIMSK   _SFR_IO8(0x39)

/* External Interrupt Control Register */
#define EICR    _SFR_IO8(0x3A)

/* RAM Page Z select register */
#define RAMPZ   _SFR_IO8(0x3B)

/* XDIV Divide control register */
#define XDIV    _SFR_IO8(0x3C)

/* 0x3D..0x3E SP */

/* 0x3F SREG */

/* Interrupt vectors */

/* External Interrupt 0 */
#define INT0_vect                       _VECTOR(1)
#define SIG_INTERRUPT0                  _VECTOR(1)

/* External Interrupt 1 */
#define INT1_vect                       _VECTOR(2)
#define SIG_INTERRUPT1                  _VECTOR(2)

/* External Interrupt 2 */
#define INT2_vect                       _VECTOR(3)
#define SIG_INTERRUPT2                  _VECTOR(3)

/* External Interrupt 3 */
#define INT3_vect                       _VECTOR(4)
#define SIG_INTERRUPT3                  _VECTOR(4)

/* External Interrupt 4 */
#define INT4_vect                       _VECTOR(5)
#define SIG_INTERRUPT4                  _VECTOR(5)

/* External Interrupt 5 */
#define INT5_vect                       _VECTOR(6)
#define SIG_INTERRUPT5                  _VECTOR(6)

/* External Interrupt 6 */
#define INT6_vect                       _VECTOR(7)
#define SIG_INTERRUPT6                  _VECTOR(7)

/* External Interrupt 7 */
#define INT7_vect                       _VECTOR(8)
#define SIG_INTERRUPT7                  _VECTOR(8)

/* Timer/Counter2 Compare Match */
#define TIMER2_COMP_vect                _VECTOR(9)
#define SIG_OUTPUT_COMPARE2             _VECTOR(9)

/* Timer/Counter2 Overflow */
#define TIMER2_OVF_vect                 _VECTOR(10)
#define SIG_OVERFLOW2                   _VECTOR(10)

/* Timer/Counter1 Capture Event */
#define TIMER1_CAPT_vect                _VECTOR(11)
#define SIG_INPUT_CAPTURE1              _VECTOR(11)

/* Timer/Counter1 Compare Match A */
#define TIMER1_COMPA_vect               _VECTOR(12)
#define SIG_OUTPUT_COMPARE1A            _VECTOR(12)

/* Timer/Counter1 Compare Match B */
#define TIMER1_COMPB_vect               _VECTOR(13)
#define SIG_OUTPUT_COMPARE1B            _VECTOR(13)

/* Timer/Counter1 Overflow */
#define TIMER1_OVF_vect                 _VECTOR(14)
#define SIG_OVERFLOW1                   _VECTOR(14)

/* Timer/Counter0 Compare Match */
#define TIMER0_COMP_vect                _VECTOR(15)
#define SIG_OUTPUT_COMPARE0             _VECTOR(15)

/* Timer/Counter0 Overflow */
#define TIMER0_OVF_vect                 _VECTOR(16)
#define SIG_OVERFLOW0                   _VECTOR(16)

/* SPI Serial Transfer Complete */
#define SPI_STC_vect                    _VECTOR(17)
#define SIG_SPI                         _VECTOR(17)

/* UART, Rx Complete */
#define UART_RX_vect                    _VECTOR(18)
#define SIG_UART_RECV                   _VECTOR(18)

/* UART Data Register Empty */
#define UART_UDRE_vect                  _VECTOR(19)
#define SIG_UART_DATA                   _VECTOR(19)

/* UART, Tx Complete */
#define UART_TX_vect                    _VECTOR(20)
#define SIG_UART_TRANS                  _VECTOR(20)

/* ADC Conversion Complete */
#define ADC_vect                        _VECTOR(21)
#define SIG_ADC                         _VECTOR(21)

/* EEPROM Ready */
#define EE_READY_vect                   _VECTOR(22)
#define SIG_EEPROM_READY                _VECTOR(22)

/* Analog Comparator */
#define ANALOG_COMP_vect                _VECTOR(23)
#define SIG_COMPARATOR                  _VECTOR(23)

#define _VECTORS_SIZE 96

/*
   The Register Bit names are represented by their bit number (0-7).
*/

/* XDIV Divide control register*/
#define    XDIVEN       7
#define    XDIV6        6
#define    XDIV5        5
#define    XDIV4        4
#define    XDIV3        3
#define    XDIV2        2
#define    XDIV1        1
#define    XDIV0        0

/* RAM Page Z select register */
#define     RAMPZ0      0

/* External Interrupt Control Register */
#define    ISC71        7
#define    ISC70        6
#define    ISC61        5
#define    ISC60        4
#define    ISC51        3
#define    ISC50        2
#define    ISC41        1
#define    ISC40        0

/* External Interrupt MaSK register */
#define    INT7         7
#define    INT6         6
#define    INT5         5
#define    INT4         4
#define    INT3         3
#define    INT2         2
#define    INT1         1
#define    INT0         0

/* �xternal Interrupt Flag Register */
#define    INTF7        7
#define    INTF6        6
#define    INTF5        5
#define    INTF4        4

/* Timer/Counter Interrupt MaSK register */
#define    OCIE2        7
#define    TOIE2        6
#define    TICIE1       5
#define    OCIE1A       4
#define    OCIE1B       3
#define    TOIE1        2
#define    OCIE0        1
#define    TOIE0        0

/* Timer/Counter Interrupt Flag Register */
#define    OCF2         7
#define    TOV2         6
#define    ICF1         5
#define    OCF1A        4
#define    OCF1B        3
#define    TOV1         2
#define    OCF0         1
#define    TOV0         0

/* MCU general Control Register */
#define    SRE          7
#define    SRW          6
#define    SE           5
#define    SM1          4
#define    SM0          3

/* MCU Status Register */
#define    EXTRF        1
#define    PORF         0

/* Timer/Counter 0 Control Register */
#define    PWM0         6
#define    COM01        5
#define    COM00        4
#define    CTC0         3
#define    CS02         2
#define    CS01         1
#define    CS00         0

/* Timer/Counter 0 Asynchronous Control & Status Register */
#define    AS0          3
#define    TCN0UB       2
#define    OCR0UB       1
#define    TCR0UB       0

/* Timer/Counter 1 Control Register */
#define    COM1A1       7
#define    COM1A0       6
#define    COM1B1       5
#define    COM1B0       4
#define    PWM11        1
#define    PWM10        0

/* Timer/Counter 1 Control and Status Register */
#define    ICNC1        7
#define    ICES1        6
#define    CTC1         3
#define    CS12         2
#define    CS11         1
#define    CS10         0

/* Timer/Counter 2 Control register */
#define    PWM2         6
#define    COM21        5
#define    COM20        4
#define    CTC2         3
#define    CS22         2
#define    CS21         1
#define    CS20         0

/* Watchdog Timer Control Register */
#define    WDTOE        4
#define    WDE          3
#define    WDP2         2
#define    WDP1         1
#define    WDP0         0

/* Data Register, Port A */
#define    PA7          7
#define    PA6          6
#define    PA5          5
#define    PA4          4
#define    PA3          3
#define    PA2          2
#define    PA1          1
#define    PA0          0

/* Data Direction Register, Port A */
#define    DDA7         7
#define    DDA6         6
#define    DDA5         5
#define    DDA4         4
#define    DDA3         3
#define    DDA2         2
#define    DDA1         1
#define    DDA0         0

/* Input Pins, Port A */
#define    PINA7        7
#define    PINA6        6
#define    PINA5        5
#define    PINA4        4
#define    PINA3        3
#define    PINA2        2
#define    PINA1        1
#define    PINA0        0

/* Data Register, Port B */
#define    PB7          7
#define    PB6          6
#define    PB5          5
#define    PB4          4
#define    PB3          3
#define    PB2          2
#define    PB1          1
#define    PB0          0

/* Data Direction Register, Port B */
#define    DDB7         7
#define    DDB6         6
#define    DDB5         5
#define    DDB4         4
#define    DDB3         3
#define    DDB2         2
#define    DDB1         1
#define    DDB0         0

/* Input Pins, Port B */
#define    PINB7        7
#define    PINB6        6
#define    PINB5        5
#define    PINB4        4
#define    PINB3        3
#define    PINB2        2
#define    PINB1        1
#define    PINB0        0

/* Data Register, Port C */
#define    PC7          7
#define    PC6          6
#define    PC5          5
#define    PC4          4
#define    PC3          3
#define    PC2          2
#define    PC1          1
#define    PC0          0

/* Data Register, Port D */
#define    PD7          7
#define    PD6          6
#define    PD5          5
#define    PD4          4
#define    PD3          3
#define    PD2          2
#define    PD1          1
#define    PD0          0

/* Data Direction Register, Port D */
#define    DDD7         7
#define    DDD6         6
#define    DDD5         5
#define    DDD4         4
#define    DDD3         3
#define    DDD2         2
#define    DDD1         1
#define    DDD0         0

/* Input Pins, Port D */
#define    PIND7        7
#define    PIND6        6
#define    PIND5        5
#define    PIND4        4
#define    PIND3        3
#define    PIND2        2
#define    PIND1        1
#define    PIND0        0

/* Data Register, Port E */
#define    PE7          7
#define    PE6          6
#define    PE5          5
#define    PE4          4
#define    PE3          3
#define    PE2          2
#define    PE1          1
#define    PE0          0

/* Data Direction Register, Port E */
#define    DDE7         7
#define    DDE6         6
#define    DDE5         5
#define    DDE4         4
#define    DDE3         3
#define    DDE2         2
#define    DDE1         1
#define    DDE0         0

/* Input Pins, Port E */
#define    PINE7        7
#define    PINE6        6
#define    PINE5        5
#define    PINE4        4
#define    PINE3        3
#define    PINE2        2
#define    PINE1        1
#define    PINE0        0

/* Input Pins, Port F */
#define    PINF7        7
#define    PINF6        6
#define    PINF5        5
#define    PINF4        4
#define    PINF3        3
#define    PINF2        2
#define    PINF1        1
#define    PINF0        0

/* SPI Status Register */
#define    SPIF         7
#define    WCOL         6

/* SPI Control Register */
#define    SPIE         7
#define    SPE          6
#define    DORD         5
#define    MSTR         4
#define    CPOL         3
#define    CPHA         2
#define    SPR1         1
#define    SPR0         0

/* UART Status Register */
#define    RXC          7
#define    TXC          6
#define    UDRE         5
#define    FE           4
#define    DOR          3

/* UART Control Register */
#define    RXCIE        7
#define    TXCIE        6
#define    UDRIE        5
#define    RXEN         4
#define    TXEN         3
#define    CHR9         2
#define    RXB8         1
#define    TXB8         0

/* Analog Comparator Control and Status Register */
#define    ACD          7
#define    ACO          5
#define    ACI          4
#define    ACIE         3
#define    ACIC         2
#define    ACIS1        1
#define    ACIS0        0

/* ADC Control and status register */
#define    ADEN         7
#define    ADSC         6
#define    ADFR         5
#define    ADIF         4
#define    ADIE         3
#define    ADPS2        2
#define    ADPS1        1
#define    ADPS0        0

/* ADC Multiplexer select */
#define    MUX2         2
#define    MUX1         1
#define    MUX0         0

/* EEPROM Control Register */
#define    EERIE        3
#define    EEMWE        2
#define    EEWE         1
#define    EERE         0

/* Constants */
#define RAMEND     0x0FFF     /*Last On-Chip SRAM Location*/
#define XRAMEND    0xFFFF
#define E2END      0x0FFF
#define E2PAGESIZE 0
#define FLASHEND   0x1FFFF


/* Fuses */
#define FUSE_MEMORY_SIZE 1

/* Low Fuse Byte */
#define FUSE_CKSEL0 (unsigned char)~_BV(0)  /* Select Clock Source */
#define FUSE_CKSEL1 (unsigned char)~_BV(1)  /* Select Clock Source */
#define FUSE_CKSEL2 (unsigned char)~_BV(2)  /* Select Clock Source */
#define FUSE_CKSEL3 (unsigned char)~_BV(3)  /* Select Clock Source */
#define FUSE_SUT0 (unsigned char)~_BV(4)  /* Select start-up time */
#define FUSE_SUT1 (unsigned char)~_BV(5)  /* Select start-up time */
#define FUSE_BODEN (unsigned char)~_BV(6)  /* Brown out detector enable */
#define FUSE_BODLEVEL (unsigned char)~_BV(7)  /* Brown out detector trigger level */
#define LFUSE_DEFAULT (FUSE_SUT1 & FUSE_SUT0 & FUSE_CKSEL3 & FUSE_CKSEL2 & FUSE_CKSEL1)


/* Lock Bits */
#define __LOCK_BITS_EXIST


/* Signature */
#define SIGNATURE_0 0x1E
#define SIGNATURE_1 0x97
#define SIGNATURE_2 0x01

#endif /* _AVR_IOM103_H_ */