7. BSP Build System#

The purpose of the build system is to produce and install artefacts from the RTEMS sources such as static libraries, start files, linker command files, configuration header files, header files, test programs, package description files, and third-party build system support files for a specific BSP in a user controlled configuration.

7.1. Overview#

The build system consists of three components which are all included in the RTEMS sources

the waf meta build system command line tool,
a wscript file used by waf, and
a set of build specification items maintained by a text editor just like other source files.

The build system is controlled by the user through

commands passed to the waf command line tool,
command line options passed to waf, and
configuration files (e.g. config.ini) used by wscript through waf invocations.

Configurable things which are subject to a local installation variant such as paths to tools are intended to be passed as command line options to the waf command line tool. Which BSPs are built and how they are configured by means of options is placed in configuration files (e.g. config.ini). The configuration files may reside anywhere in the file system and the goal is to have it under version control by the user.

7.2. Work Flow#

There are five steps necessary to build and install one or more BSPs.

Select which BSPs you want to build. See also Deployment and ./waf bsplist.
Write a BSP build configuration file (e.g. config.ini) which determines which BSPs are built and how they are configured.
Run the ./waf configure command to generate the build environment.
Build the BSP artefacts with ./waf. The build uses the build environment created by ./waf configure. The BSP build configuration file (e.g. config.ini) is no longer used and may be deleted.
Install the BSP artefacts with ./waf install.

7.3. Commands#

The build system is controlled by invocations of the ./waf command line tool instead of the well known make. Since waf is written in Python, a standard Python 2.7 or 3 installation without third-party packages is required to run it. The ./waf command line tool must be invoked in the RTEMS source tree top-level directory.

Some commands accept the --rtems-specs command line option. This option specifies paths to build specification items. It is an advanced option and there is normally no need to use it. It may be used to customize the build at the level of the build specification. For more information see the Build System chapter of the RTEMS Software Engineering guide.

7.3.1. Help#

Use ./waf --help to get a list of commands and options.

7.3.2. BSP List#

The BSP list command ./waf bsplist loads the build specification items and generates a list of base BSPs from it. The list is sorted by architecture and base BSP name. Which base BSPs are listed can be controlled by the --rtems-bsps command line option. It expects a comma-separated list of Python regular expressions which select the desired BSP variants. The path to the build specification items can be specified by the --rtems-specs command line option.

$ ./waf bsplist --rtems-bsps=sparc/
sparc/at697f
sparc/erc32
sparc/gr712rc
sparc/gr740
sparc/leon2
sparc/leon3
sparc/ut699
sparc/ut700

$ ./waf bsplist --rtems-bsps='/leon,/rv64imac$'
riscv/rv64imac
sparc/leon2
sparc/leon3

7.3.3. BSP Defaults#

The BSP defaults command ./waf bspdefaults loads the build specification items and generates a list options with default values for each base BSP from it. The list is sorted by architecture and base BSP name. Which base BSPs are listed can be controlled by the --rtems-bsps command line option. Default values may depend on the selected compiler. The compiler can be specified by the --rtems-compiler command line option. The path to the build specification items can be specified by the --rtems-specs command line option.

$ ./waf bspdefaults --rtems-bsps=gr712rc --rtems-compiler=gcc | grep ABI_FLAGS
ABI_FLAGS = -mcpu=leon3 -mfix-gr712rc

$ ./waf bspdefaults --rtems-bsps=gr712rc --rtems-compiler=clang | grep ABI_FLAGS
ABI_FLAGS = -mcpu=gr712rc

7.3.4. Configure#

The configure command ./waf configure loads the BSP build configuration files and the build specification items and configures the build environment accordingly. The configuration files can be specified by the --rtems-config command line option. It expects a comma-separated list of paths to the configuration files. By default, the file config.ini is used. The paths to RTEMS tools can be specified by the --rtems-tools command line option. It expects a comma-separated list of prefix paths to tools, e.g. compiler, linker, etc. By default, the installation prefix is used for the RTEMS tools. Tools are searched in the prefix path and also in a bin subdirectory of the prefix path. The path to the build specification items can be specified by the --rtems-specs command line option.

7.3.5. Build, Clean, and Install#

The commands ./waf, ./waf clean, and ./waf install load the build specification items according to the specification paths stored in the build environment. The BSP build configuration files (e.g. config.ini) used by the ./waf configure command to create the build environment are not longer used and may be deleted. The build commands perform a dependency tracking and re-build artefacts if input sources changed. Input sources are also the build specification.

7.4. Configuration#

The BSP build configuration is done via INI-style configuration files. The configuration files are consumed by the ./waf configure command. By default, the file config.ini is used. You can specify other configuration files with the --rtems-config command line option. The configuration files consist of sections and options (key-value pairs).

To build a particular BSP, you have to create a section with the BSP variant name.

[sparc/erc32]

This one line configuration file is sufficient to build the base BSP sparc/erc32 with default values for all options. The base BSPs are determined by the build specification. The ./waf bsplist command lists all base BSPs. You can create your own BSP names. However, in this case you have to inherit from a base BSP. The inheritance works only within an architecture, e.g. a riscv BSP cannot inherit options from an arm BSP.

[sparc/foobar]
INHERIT = erc32

The inheritance works recursively and must end up in a base BSP.

[sparc/foo]
INHERIT = erc32

[sparc/bar]
INHERIT = foo

A child BSP variant inherits all options from the parent BSP variant. The child BSP can override the inherited options.

You can determine the compiler used to build the BSP with the COMPILER option.

[sparc/gr740_gcc]
INHERIT = gr740
COMPILER = gcc

[sparc/gr740_clang]
INHERIT = gr740
COMPILER = clang

Use the ./waf bspdefaults command to get a list of all configuration options with default values.

$ ./waf bspdefaults --rtems-bsps=sparc/erc32
[sparc/erc32]
# Flags passed to the library archiver
ARFLAGS = crD
# Warning flags passed to the C compiler
CC_WARNING_FLAGS = -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs
# Warning flags passed to the C++ compiler
CXX_WARNING_FLAGS =
# Flags passed to the linker (GNU ld)
LDFLAGS = -Wl,--gc-sections
# Enable the Ada support
__RTEMS_ADA__ = False
# Enable the RTEMS internal debug support
RTEMS_DEBUG = False
...
# Install the legacy application Makefile framework.
INSTALL_LEGACY_MAKEFILES = True

It is not recommended to blindly add all the options obtained through the ./waf bspdefaults command to custom configuration files. The specified options should be kept at the necessary minimum to get the desired build.

Some projects may still want to specify all options in a configuration file to be independent of changes in the base BSP. You can review differences between the user and base BSP values with the diff command.

$ ./waf bspdefaults --rtems-bsps=sparc/erc32 > config.ini
$ sed -i 's/BUILD_TESTS = False/BUILD_TESTS = True/' config.ini
$ ./waf bspdefaults --rtems-bsps=sparc/erc32 | diff -u - config.ini
--- config.ini  2019-12-04 08:21:36.049335872 +0100
+++ -   2019-12-04 08:21:41.187432405 +0100
@@ -31,7 +31,7 @@
 # Build the Ada test programs (may be also enabled by BUILD_TESTS)
 BUILD_ADATESTS = False
 # Build the test programs
-BUILD_TESTS = False
+BUILD_TESTS = True
 # Build the benchmark programs (may be also enabled by BUILD_TESTS)
 BUILD_BENCHMARKS = False
 # Build the file system test programs (may be also enabled by

There is a special section DEFAULT which can be used to specify default values for all other sections of the configuration file. In the following example configuration file, building of the tests is enabled for the sparc/erc32 and the riscv/griscv BSP.

[DEFAULT]
BUILD_TESTS = True

[sparc/erc32]

[riscv/griscv]

7.5. Migration from Autoconf/Automake#

The Autoconf/Automake based build system used a configure command to configure a single target architecture and one or more BSPs. The make command was used to build it. The configure command is replaced by a ./waf configure invocation with configuration file. The make command is replaced by ./waf and make install is replaced by ./waf install.

Here are some hints for how a configure command line can be converted to options in the configuration file of the waf based build system. BSP options given at the configure command line have to be added to the BSP section in the configuration file.

--target=${arch}-rtems6 --enable-rtembsp=${bsp}: To build a BSP add [${arch}/${bsp}] to the configuration file.
--enable-ada | --disable-ada: Set __RTEMS_ADA__ to True or False in the BSP section of the configuration file.
--enable-multiprocessing | --disable-multiprocessing: Set RTEMS_MULTIPROCESSING to True or False in the BSP section of the configuration file.
--enable-paravirt | --disable-paravirt: Set RTEMS_PARAVIRT to True or False in the BSP section of the configuration file.
--enable-profiling | --disable-profiling: Set RTEMS_PROFILING to True or False in the BSP section of the configuration file.
--enable-posix | --disable-posix: Set RTEMS_POSIX_API to True or False in the BSP section of the configuration file.
--enable-rtems-debug | --disable-rtems-debug: Set RTEMS_DEBUG to True or False in the BSP section of the configuration file.
--enable-smp | --disable-smp: Set RTEMS_SMP to True or False in the BSP section of the configuration file.
--enable-tests | --disable-tests: Set BUILD_TESTS to True or False in the BSP section of the configuration file.
--enable-tests=samples: Set BUILD_SAMPLES to True or False in the BSP section of the configuration file.

Please have a look at the following example configuration file.

# --target=sparc-rtems6 --enable-rtemsbsp=erc32
[sparc/erc32]

# --enable-ada
__RTEMS_ADA__ = True

# --enable-multiprocessing
RTEMS_MULTIPROCESSING = False

# --disable-paravirt
RTEMS_PARAVIRT = False

# --enable-profiling
RTEMS_PROFILING = True

# --disable-posix
RTEMS_POSIX_API = False

# --enable-rtems-debug
RTEMS_DEBUG = True

# --disable-smp
RTEMS_SMP = False

# --enable-tests
BUILD_TESTS = True

# BSP_POWER_DOWN_AT_FATAL_HALT=
BSP_POWER_DOWN_AT_FATAL_HALT = False

BSP Build System

Contents