RTEMS 4.9.0 On-Line Library

Network Commands route - show or manipulate the ip routing table

RTEMS Shell User's Guide

6.2.3: route - show or manipulate the ip routing table

SYNOPSYS:

route [subcommand] [args]

DESCRIPTION:

This command is used to display and manipulate the routing table. When invoked with no arguments, the current routing information is displayed. When invoked with the subcommands add or del, then additional arguments must be provided to describe the route.

Command templates include the following:

route [add|del] -net IP_ADDRESS gw GATEWAY_ADDRESS [netmask MASK]
route [add|del] -host IP_ADDRESS gw GATEWAY_ADDRES [netmask MASK]

When not provided the netmask defaults to 255.255.255.0

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

Just like its counterpart on GNU/Linux and BSD systems, this command is complicated. More example usages would be a welcome submission.

EXAMPLES:

The following is an example of how to use route to display, add, and delete a new route:

[/] $ route
Destination     Gateway/Mask/Hw    Flags     Refs     Use Expire Interface
default         192.168.1.14       UGS         0        0      0 eth1
192.168.1.0     255.255.255.0      U           0        0      1 eth1
192.168.1.14    00:A0:C8:1C:EE:28  UHL         1        0   1444 eth1
192.168.1.51    00:1D:7E:0C:D0:7C  UHL         0    10844   1202 eth1
192.168.1.151   00:1C:23:B2:0F:BB  UHL         2       37   1399 eth1
[/] $  route add -net 192.168.3.0 gw 192.168.1.14
[/] $ route
Destination     Gateway/Mask/Hw    Flags     Refs     Use Expire Interface
default         192.168.1.14       UGS         0        0      0 eth1
192.168.1.0     255.255.255.0      U           0        0      1 eth1
192.168.1.14    00:A0:C8:1C:EE:28  UHL         2        0   1498 eth1
192.168.1.51    00:1D:7E:0C:D0:7C  UHL         0    14937   1202 eth1
192.168.1.151   00:1C:23:B2:0F:BB  UHL         2       96   1399 eth1
192.168.3.0     192.168.1.14       UGS         0        0      0 eth1
[/] $ route del -net 192.168.3.0 gw 192.168.1.14
[/] $ route
Destination     Gateway/Mask/Hw    Flags     Refs     Use Expire Interface
default         192.168.1.14       UGS         0        0      0 eth1
192.168.1.0     255.255.255.0      U           0        0      1 eth1
192.168.1.14    00:A0:C8:1C:EE:28  UHL         1        0   1498 eth1
192.168.1.51    00:1D:7E:0C:D0:7C  UHL         0    15945   1202 eth1
192.168.1.151   00:1C:23:B2:0F:BB  UHL         2      117   1399 eth1

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_ROUTE to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_ROUTE when all shell commands have been configured.

PROGRAMMING INFORMATION:

The route is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_route(
  int    argc,
  char **argv
);

The configuration structure for the route has the following prototype:

extern rtems_shell_cmd_t rtems_shell_ROUTE_Command;

RTEMS Shell User's Guide