6. Network Servers

6.1. RTEMS FTP Daemon

The RTEMS FTPD is a complete file transfer protocol (FTP) daemon which can store, retrieve, and manipulate files on the local filesystem. In addition, the RTEMS FTPD provides “hooks” which are actions performed on received data. Hooks are useful in situations where a destination file is not necessarily appropriate or in cases when a formal device driver has not yet been implemented.

This server was implemented and documented by Jake Janovetz (janovetz@tempest.ece.uiuc.edu).

6.1.1. Configuration Parameters

The configuration structure for FTPD is as follows:

struct rtems_ftpd_configuration
{
    rtems_task_priority     priority;           /* FTPD task priority  */
    unsigned long           max_hook_filesize;  /* Maximum buffersize  */
    /*    for hooks        */
    int                     port;               /* Well-known port     */
    struct rtems_ftpd_hook  *hooks;             /* List of hooks       */
};

The FTPD task priority is specified with priority. Because hooks are not saved as files, the received data is placed in an allocated buffer. max_hook_filesize specifies the maximum size of this buffer. Finally, hooks is a pointer to the configured hooks structure.

6.1.2. Initializing FTPD (Starting the daemon)

Starting FTPD is done with a call to rtems_initialize_ftpd(). The configuration structure must be provided in the application source code. Example hooks structure and configuration structure folllow.

struct rtems_ftpd_hook ftp_hooks[] =
{
    {"untar", Untar_FromMemory},
    {NULL, NULL}
};

struct rtems_ftpd_configuration rtems_ftpd_configuration =
{
    40,                     /* FTPD task priority */
    512*1024,               /* Maximum hook 'file' size */
    0,                      /* Use default port */
    ftp_hooks               /* Local ftp hooks */
};

Specifying 0 for the well-known port causes FTPD to use the UNIX standard FTPD port (21).

6.1.3. Using Hooks

In the example above, one hook was installed. The hook causes FTPD to call the function Untar_FromMemory when the user sends data to the file untar. The prototype for the untar hook (and hooks, in general) is:

int Untar_FromMemory(unsigned char *tar_buf, unsigned long size);

An example FTP transcript which exercises this hook is:

220 RTEMS FTP server (Version 1.0-JWJ) ready.
Name (dcomm0:janovetz): John Galt
230 User logged in.
Remote system type is RTEMS.
ftp> bin
200 Type set to I.
ftp> dir
200 PORT command successful.
150 ASCII data connection for LIST.
drwxrwx--x      0     0         268  dev
drwxrwx--x      0     0           0  TFTP
226 Transfer complete.
ftp> put html.tar untar
local: html.tar remote: untar
200 PORT command successful.
150 BINARY data connection.
210 File transferred successfully.
471040 bytes sent in 0.48 secs (9.6e+02 Kbytes/sec)
ftp> dir
200 PORT command successful.
150 ASCII data connection for LIST.
drwxrwx--x      0     0         268  dev
drwxrwx--x      0     0           0  TFTP
drwxrwx--x      0     0        3484  public_html
226 Transfer complete.
ftp> quit
221 Goodbye.