5. Installation

This section details how to set up and install the RTEMS Ecosystem. You will create a set of tools and an RTEMS kernel for your selected Board Support Package (BSP).

You will be asked to follow a few simple steps and when you have finished you will have a development environment set up you can use to build applications for RTEMS. You will have also created a development environment you and a team can adapt for a project of any size and complexity.

RTEMS applications are developed using cross-development tools running on a development computer, more commonlly referred to as the host computer. These are typically your desktop machine or a special build server. All RTEMS tools and runtime libraries are built from source on your host machine. The RTEMS Project does not maintain binary builds of the tools. This may appear to be the opposite to what you normally experience with host operating systems, and it is, however this approach works well. RTEMS is not a host operating system and it is not a distrbution. Providing binary packages for every possible host operating system is too big a task for the RTEMS Project and it is not a good use of core developer time. Their time is better spent making RTEMS better and faster.

The RTEMS Project base installation set ups the tools and the RTEMS kernel for the selected BSPs. The tools run on your host computer are used to compile, link, and format executables so they can run on your target hardware.

The RTEMS Project supports two set ups, release and developer environments. Release installations create the tools and kernel in a single pass ready for you to use. The tools and kernel are stable and only bug fixes are added creating new dot point releases. The developer set up tracks the Git repositories for the tools and kernel.

5.1. Prefixes

You will see the term prefix referred to thoughout this documentation and in a wide number of software packages you can download from the internet. A prefix is the path on your computer a software package is built and installed under. Packages that have a prefix will place all parts under the prefix path. On a host computer like Linux the packages you install from your distribution typically use a platform specific standard prefix. For example on Linux it is /usr and on FreeBSD it is /usr/local.

We recommend you DO NOT use the standard prefix when installing the RTEMS Tools. The standard prefix is the default prefix each package built by the RSB contains. If you are building the tools when logged in as a Standard User and not as the Super User (root) or Administrator the RTEMS Source Builder (RSB) will fail and report an error if the default prefix is not writable. We recommend you leave the standand prefix for the packages your operating system installs or software you manually install such as applications.

A further reason not to use the standard prefix is to allow more than one version of RTEMS to exist on your host machine at a time. The autoconf and automake tools required by RTEMS are not versioned and vary between the various versions of RTEMS. If you use a single prefix such as the standard prefix there is a chance parts from a package of different versions may interact. This should not happen but it can.

For POSIX or Unix hosts, the RTEMS Project uses /opt/rtems as it’s standard prefix. We view this prefix as a production level path, and we prefer to place development versions under a different prefix away from the production versions. Under this top level prefix we place the various versions we need for development. For example the version 4.11.0 prefix would be /opt/rtems/4.11.0. If an update called 4.11.1 is released the prefix would be /opt/rtems/4.11.1. These are recommendations and the choice of what you use is entirely yours. You may decide to have a single path for all RTEMS 4.11 releases of /opt/rtems/4.11.

For Windows a typical prefix is C:\opt\rtems and as an MSYS2 path this is /c/opt/rtems.

5.1.1. Project Sandboxing

Project specific sandboxes let you have a number of projects running in parallel with each project in its own sandbox. You simply have a prefix per project and under that prefix you create a simple yet repeatable structure.

As an example lets say I have a large disk mounted under /bd for Big Disk. As root create a directory called projects and give the directory suitable permissions to be writable by you as a user.

Lets create a project sandbox for my Box Sorter project. First create a project directory called /bd/projects/box-sorter. Under this create rtems and under that create rtems-4.11.0. Under this path you can follow the Chapter 5 Section 2 - Releases procedure to build a tool set using the prefix of /bd/projects/box-sorter/rtems/4.11.0. You are free to create your project specific directories under /bd/projects/box-sorter. The top level directories would be:

/bd/projects
Project specific development trees.
/bd/projects/box-sorter
Box Sorter project sandbox.
/bd/projects/box-sorter/rtems/4.11.0
Project prefix for RTEMS 4.11.0 compiler, debuggers, tools and installed Board Support Package (BSP).

A variation is to use the --without-rtems option with the RSB to not build the BSPs when building the tools and to build RTEMS specifically for each project. This lets you have a production tools installed at a top level on your disk and each project can have a specific and possibly customised version of RTEMS. The top level directories would be:

/bd/rtems
The top path to production tools.
/bd/rtems/4.11.0
Production prefix for RTEMS 4.11.0 compiler, debuggers and tools.
/bd/projects
Project specific development trees.
/bd/projects/box-sorter
Box Sorter project sandbox.
/bd/projects/box-sorter/rtems
Box Sorter project’s custom RTEMS kernel source and installed BSP.

A further varation if there is an RTEMS kernel you want to share between projects is it to move this to a top level and share. In this case you will end up with:

/bd/rtems
The top path to production tools and kernels.
/bd/rtems/4.11.0
Production prefix for RTEMS 4.11.0.
/bd/rtems/4.11.0/tools
Production prefix for RTEMS 4.11.0 compiler, debuggers and tools.
/bd/rtems/4.11.0/bsps
Production prefix for RTEMS 4.11.0 Board Support Packages (BSPs).
/bd/projects
Project specific development trees.
/bd/projects/box-sorter
Box Sorter project sandbox.

Finally you can have a single set of production tools and RTEMS BSPs on the disk under /bd/rtems you can share between your projects. The top level directories would be:

/bd/rtems
The top path to production tools and kernels.
/bd/rtems/4.11.0
Production prefix for RTEMS 4.11.0 compiler, debuggers, tools and Board Support Packages (BSPs).
/bd/projects
Project specific development trees.
/bd/projects/box-sorter
Box Sorter project sandbox.

The project sandoxing approach allows you move a specific production part into the project’s sandbox to allow you to customise it. This is useful if you are testing new releases. The typical dependency is the order listed above. You can test new RTEMS kernels with production tools but new tools will require you build the kernel with them. Release notes with each release will let know what you need to update.

If the machine is a central project development machine simply replace projects with users and give each user a personal directory.

5.2. Releases

RTEMS releases provide a stable version of the kernel for the supported architectures. RTEMS maintaines the current and previous releases. Support for older releases is provided using the RTEMS support channels.

Please read Chapter 4 - Host Computer before continuing. The following procedure assumes you have installed and configured your host operating. It also assumes you have installed any dependent packages needed when building the tools and the kernel.

You need to select a location to build and install the RTEMS Tool chain and RTEMS. Make sure there is plenty of disk space and a fast disk is recommended. Our procedure will document building and installing the tools in a base directory called /opt/rtems. This path will require root access. If you are working on a machine you do not have root access to you can use a home directory, If building on Windows use /c/opt/rtems to keep the top level paths as short as possible. Chapter 4 Section 4.1 - Windows Path Length provides more detail about path lengths on Windows.

The location used to install the tools and kernel is called the prefix. Chapter 5 Section 1 - Prefixes explains prefixes and how to use them. It is best to have a prefix for each different version of RTEMS you are using. If you are using RTEMS 4.11 in production it is not a good idea to install a development version of 4.12 over the top by using the same prefix as the 4.11 build. A separate prefix for each version avoids this.

Released versions of the RTEMS Source Builder (RSB) downloads all source code for all packages from the FTP File Server rather than from the package’s home site. Hosting all the source on the FTP File Server ensures the source is present for the life of the release on the FTP File Server. If there is a problem accessing the RTEMS FTP the RSB will fall back to the packages home site.

The FTP File Server is hosted at the Oregon State University’s The Open Source Lab (http://osuosl.org/). This is a nonprofit organization working for the advancement of open source technologies and RTEMS is very fortunate to be shosted here. It has excellent internet access and performance.

Note

Controlling the RTEMS Kernel Build

Building releases by default builds the RTEMS kernel. To not build the RTEMS kernel add the --without-rtems option to the RSB command line.

By default all the BSPs for an architecture are built. If you only wish to have a specific BSP built you can specify the BSP list by providing to the RSB the option --with-rtemsbsp. For example to build two BSPs for the SPARC architecture you can supply --with-rtemsbsp="erc32 sis". This can speed the build time up for some architectures that have a lot of BSPs.

Once you have built the tools and kernel you can move to the Packages section of the manual.

5.2.1. RTEMS Tools and Kernel

This procedure will build a SPARC tool chain. Set up a suitable workspace to build the release in. On Unix:

$ cd
$ mkdir -p development/rtems/releases
$ cd development/rtems/releases

If building on Windows:

$ cd /c
$ mkdir -p opt/rtems
$ cd opt/rtems

Note the paths on Windows will be different to those shown.

Download the RTEMS Source Builder (RSB) from the RTEMS FTP server:

$ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
--2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz
Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151
Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 967056 (944K) [application/x-xz]
Saving to: 'rtems-source-builder-4.11.0.tar.xz'

rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s   in 5.5s

2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056]

On Unix unpack the RSB release tar file using:

$ tar Jxf rtems-source-builder-4.11.0.tar.xz
$ cd rtems-source-builder-4.11.0/rtems/

On Windows you need to shorten the path (See Chapter 4 Section 4.1 - Windows Path Length) after you have unpacked the tar file:

$ tar Jxf rtems-source-builder-4.11.0.tar.xz
$ mv rtems-source-builder-4.11.0 4.110
$ cd 4.11.0

Build a tool chain for the SPARC architecure. We are using the SPARC architecture in our example because GDB has a good simulator that lets us run and test the samples RTEMS builds by default

If building on Windows add --jobs=none to avoid GNU make issues on Windows discussed in Chapter 4 Section 4.2 - Parallel Builds with Make.

$ ../source-builder/sb-set-builder \
    --prefix=/opt/rtems/4.11 4.11/rtems-sparc
Build Set: 4.11/rtems-sparc
Build Set: 4.11/rtems-autotools.bset
Build Set: 4.11/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd10.1-1
Creating source directory: sources
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
building: autoconf-2.69-x86_64-freebsd10.1-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd10.1-1
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
Creating source directory: patches
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
building: automake-1.12.6-x86_64-freebsd10.1-1
cleaning: autoconf-2.69-x86_64-freebsd10.1-1
cleaning: automake-1.12.6-x86_64-freebsd10.1-1
Build Set: Time 0:00:32.749337
Build Set: 4.11/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-freebsd10.1-1
building: autoconf-2.69-x86_64-freebsd10.1-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-freebsd10.1-1
building: automake-1.12.6-x86_64-freebsd10.1-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml
installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
cleaning: autoconf-2.69-x86_64-freebsd10.1-1
cleaning: automake-1.12.6-x86_64-freebsd10.1-1
Build Set: Time 0:00:15.619219
Build Set: Time 0:00:48.371085
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-freebsd10.1-1
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
building: expat-2.1.0-x86_64-freebsd10.1-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml
config: tools/rtems-binutils-2.26-1.cfg
package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
reporting: tools/rtems-binutils-2.26-1.cfg ->
sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt
reporting: tools/rtems-binutils-2.26-1.cfg ->
sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml
config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml
config: tools/rtems-gdb-7.9-1.cfg
package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch
downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch
downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch
downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch
downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch
downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch
downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch
downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch
downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch
downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch
downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch
downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch
downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch
downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch
downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch
downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch
downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch
downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch
downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch
downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch
downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch
downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch
downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch
downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py
downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%)
building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
reporting: tools/rtems-gdb-7.9-1.cfg ->
sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt
reporting: tools/rtems-gdb-7.9-1.cfg ->
sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml
config: tools/rtems-tools-4.11-1.cfg
package: rtems-tools-4.11.0-1
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz
downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%)
building: rtems-tools-4.11.0-1
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml
config: tools/rtems-kernel-4.11.cfg
package: sparc-rtems4.11-kernel-4.11.0-1
download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz
downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%)
building: sparc-rtems4.11-kernel-4.11.0-1
reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt
reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml
installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0
installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0
installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0
cleaning: expat-2.1.0-x86_64-freebsd10.1-1
cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1
cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1
cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1
cleaning: rtems-tools-4.11.0-1
cleaning: sparc-rtems4.11-kernel-4.11.0-1
Build Set: Time 0:19:15.713662

You can now build a 3rd party library or an application as defailted in TBD.

5.3. Developer (Unstable)

RTEMS provides open access to it’s development processes. We call this the developer set up. The project encouages all users to inspect, review, comment and contribute to the code base. The processes described here are the same processes the core development team use when developing and maintaining RTEMS.

Warning

The development version is not for use in production and it can break from time to time.

Please read Chapter 4 - Host Computer before continuing. The following procedure assumes you have installed and configured your host operating system. It also assumes you have installed any dependent packages needed when building the tools and the kernel.

You need to select a location to build and install the RTEMS Tool chain and RTEMS. Make sure there is plenty of disk space and a fast disk is recommended. Our procedure will document building and installing the tools in a home directory called development/rtems. Using a home directory means you can do this without needing to be root. You can also use /opt/rtems/build if you have access to that path.

The location used to install the tools and kernel is called the prefix. It is best to have a prefix for each different version of RTEMS you are using. If you are using RTEMS 4.11 in production it is not a good idea to install a development version of 4.12 over the top. A separate prefix for each version avoids this.

The RTEMS tool chain changes less often than the RTEMS kernel. One method of working with development releases is to have a separate prefix for the RTEMS tools and a different one for the RTEMS kernel. You can then update each without interacting with the other. You can also have a number of RTEMS versions available to test with.

Downloading the source

You need an internet connection to download the source. The downloaded source is cached locally and the RSB checksums it. If you run a build again the download output will be missing. Using the RSB from git will download the source from the upstream project’s home site and this could be http, ftp, or git.

5.3.1. POSIX and OS X Host Tools Chain

This procedure will build a SPARC tool chain.

Clone the RTEMS Source Builder (RSB) repository:

$ cd
$ mkdir -p development/rtems
$ cd development/rtems
$ git clone git://git.rtems.org/rtems-source-builder.git rsb
Cloning into 'rsb'...
remote: Counting objects: 5837, done.
remote: Compressing objects: 100% (2304/2304), done.
remote: Total 5837 (delta 4014), reused 5056 (delta 3494)
Receiving objects: 100% (5837/5837), 2.48 MiB | 292.00 KiB/s, done.
Resolving deltas: 100% (4014/4014), done.
Checking connectivity... done.

Check all the host packages you need are present. Current libraries are not checked and this includes checking for the python development libraries GDB requires:

$ cd rsb
$ ./source-builder/sb-check
RTEMS Source Builder - Check, 4.12 (e645642255cc)
Environment is ok

Build a tool chain for the SPARC architecure. We are using the SPARC architecture because GDB has a good simulator that lets us run and test the samples RTEMS builds by default. The current development version is 4.12 and is on master:

$ cd rtems
$ ../source-builder/sb-set-builder \
    --prefix=/usr/home/chris/development/rtems/4.12 4.12/rtems-sparc
RTEMS Source Builder - Set Builder, 4.12 (e645642255cc)
Build Set: 4.12/rtems-sparc
Build Set: 4.12/rtems-autotools.bset
Build Set: 4.12/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
Creating source directory: sources
download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
building: autoconf-2.69-x86_64-linux-gnu-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
Creating source directory: patches
download: https://git.rtems.org/rtems-tools/plain/tools/4.12/automake/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
building: automake-1.12.6-x86_64-linux-gnu-1
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Set: Time 0:00:17.465024
Build Set: 4.12/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-linux-gnu-1
building: autoconf-2.69-x86_64-linux-gnu-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-linux-gnu-1
building: automake-1.12.6-x86_64-linux-gnu-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
installing: autoconf-2.69-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
installing: automake-1.12.6-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
cleaning: autoconf-2.69-x86_64-linux-gnu-1
cleaning: automake-1.12.6-x86_64-linux-gnu-1
Build Set: Time 0:00:05.358624
Build Set: Time 0:00:22.824422
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-linux-gnu-1
download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
  redirect: http://internode.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
building: expat-2.1.0-x86_64-linux-gnu-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
config: tools/rtems-binutils-2.26-1.cfg
package: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.12/binutils/binutils-2.26-rtems-aarch64-x86_64.patch -> patches/binutils-2.26-rtems-aarch64-x86_64.patch
downloading: patches/binutils-2.26-rtems-aarch64-x86_64.patch - 3.2kB of 3.2kB (100%)
building: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.txt
reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.xml
config: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg
package: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
download: ftp://gcc.gnu.org/pub/gcc/snapshots/6-20160228/gcc-6-20160228.tar.bz2 -> sources/gcc-6-20160228.tar.bz2
downloading: sources/gcc-6-20160228.tar.bz2 - 90.8MB of 90.8MB (100%)
download: ftp://sourceware.org/pub/newlib/newlib-2.3.0.20160226.tar.gz -> sources/newlib-2.3.0.20160226.tar.gz
downloading: sources/newlib-2.3.0.20160226.tar.gz - 16.9MB of 16.9MB (100%)
download: http://www.mpfr.org/mpfr-2.4.2/mpfr-2.4.2.tar.bz2 ->
sources/mpfr-2.4.2.tar.bz2
downloading: sources/mpfr-2.4.2.tar.bz2 - 1.0MB of 1.0MB (100%)
download: http://www.multiprecision.org/mpc/download/mpc-0.8.1.tar.gz -> sources/mpc-0.8.1.tar.gz
downloading: sources/mpc-0.8.1.tar.gz - 532.2kB of 532.2kB (100%)
download: ftp://ftp.gnu.org/gnu/gmp/gmp-4.3.2.tar.bz2 -> sources/gmp-4.3.2.tar.bz2
downloading: sources/gmp-4.3.2.tar.bz2 - 1.8MB of 1.8MB (100%)
building: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.xml
config: tools/rtems-gdb-7.9-1.cfg
package: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
download: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-7.9-aarch64-x86_64.patch -> patches/gdb-7.9-aarch64-x86_64.patch
downloading: patches/gdb-7.9-aarch64-x86_64.patch - 1.7kB of 1.7kB (100%)
building: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.txt
reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.xml
config: tools/rtems-tools-4.12-1.cfg
package: rtems-tools-HEAD-1
Creating source directory: sources/git
git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
git: reset: git://git.rtems.org/rtems-tools.git
git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
git: checkout: git://git.rtems.org/rtems-tools.git => HEAD
git: pull: git://git.rtems.org/rtems-tools.git
building: rtems-tools-HEAD-1
reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.txt
reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.xml
installing: expat-2.1.0-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
installing: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
installing: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
installing: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
installing: rtems-tools-HEAD-1 -> /usr/home/chris/development/rtems/4.12
cleaning: expat-2.1.0-x86_64-linux-gnu-1
cleaning: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
cleaning: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
cleaning: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
cleaning: rtems-tools-HEAD-1
Build Set: Time 0:31:09.754219

5.3.2. Windows Host Tool Chain

This section details how you create an RTEMS development environment on Windows. The installation documented here is on Windows 7 64bit Professional. Building on Windows 10 has been reported as working.

Please see Chapter 4 Section 4 - Microsoft Windows before continuing.

Note

If the RSB reports error: no hosts defaults found; please add you have probably opened an MSYS2 32bit Shell. Close all 32bit Shell windows and open the MSYS2 64bit Shell.

5.3.2.1. RTEMS Windows Tools

Create a workspace for RTEMS using the following shell command:

Creating Tool Archives

Add --bset-tar-file to the sb-set-builder command line to create tar files of the built package set.

 ~
$ mkdir -p /c/opt/rtems

The /c path is an internal MSYS2 mount point of the C: drive. The command creates the RTEMS work space on the C: drive. If you wish to use another drive please subsitute /c with your drive letter.

We build and install all RTEMS packages under the prefix we just created. Change to that directory and get a copy of the RSB:

 ~
$ cd /c/opt/rtems
 /c/opt/rtems
$ git clone git://git.rtems.org/rtems-source-builder.git rsb
Cloning into 'rsb'...
remote: Counting objects: 5716, done.
remote: Compressing objects: 100% (2183/2183), done.
remote: Total 5716 (delta 3919), reused 5071 (delta 3494)
Receiving objects: 100% (5716/5716), 2.46 MiB | 656.00 KiB/s, done.
Resolving deltas: 100% (3919/3919), done.
Checking connectivity... done.
Checking out files: 100% (630/630), done.
 /c/opt/rtems
$ cd rsb

We are building RTEMS 4.11 tools so select the 4.11 branch:

 /c/opt/rtems/rsb
$ git checkout 4.11
Branch 4.11 set up to track remote branch 4.11 from origin.
Switched to a new branch '4.11'
 /c/opt/rtems/rsb
$

Check the RSB has a valid environment:

 /c/opt/rtems/rsb
$ cd rtems
 /c/opt/rtems/rsb/rtems
$ ../source-builder/sb-check
RTEMS Source Builder - Check, 4.11 (01ac76f2f90f)
Environment is ok
 /c/opt/rtems/rsb/rtems
$

To build a set of RTEMS tools for the Intel i386 architecture. The build runs a single job rather than a job per CPU in your machine and will take a long time so please be patient. The RSB creates a log file containing all the build output and it will be changing size. The RSB command to build i386 tools is:

 /c/opt/rtems/rsb/rtems
$ ../source-builder/sb-set-builder --prefix=/c/opt/rtems/4.11 \
                                   --jobs=none 4.11/rtems-i386
RTEMS Source Builder - Set Builder, 4.11 (01ac76f2f90f)
Build Set: 4.11/rtems-i386
Build Set: 4.11/rtems-autotools.bset
Build Set: 4.11/rtems-autotools-internal.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-w64-mingw32-1
Creating source directory: sources
download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
 building: autoconf-2.69-x86_64-w64-mingw32-1
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-w64-mingw32-1
download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
 building: automake-1.12.6-x86_64-w64-mingw32-1
cleaning: autoconf-2.69-x86_64-w64-mingw32-1
cleaning: automake-1.12.6-x86_64-w64-mingw32-1
Build Set: Time 0:00:42.515625
Build Set: 4.11/rtems-autotools-base.bset
config: tools/rtems-autoconf-2.69-1.cfg
package: autoconf-2.69-x86_64-w64-mingw32-1
building: autoconf-2.69-x86_64-w64-mingw32-1
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-w64-mingw32-1.xml
config: tools/rtems-automake-1.12.6-1.cfg
package: automake-1.12.6-x86_64-w64-mingw32-1
building: automake-1.12.6-x86_64-w64-mingw32-1
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-w64-mingw32-1.xml
tarball: tar/rtems-4.11-autotools-x86_64-w64-mingw32-1.tar.bz2
installing: autoconf-2.69-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: automake-1.12.6-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
cleaning: autoconf-2.69-x86_64-w64-mingw32-1
cleaning: automake-1.12.6-x86_64-w64-mingw32-1
Build Set: Time 0:00:37.718750
Build Set: Time 0:01:20.234375
config: devel/expat-2.1.0-1.cfg
package: expat-2.1.0-x86_64-w64-mingw32-1
download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
 redirect: http://iweb.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
building: expat-2.1.0-x86_64-w64-mingw32-1
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.txt
reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-w64-mingw32-1.xml
config: tools/rtems-binutils-2.24-1.cfg
package: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1
download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.24.tar.bz2 -> sources/binutils-2.24.tar.bz2
downloading: sources/binutils-2.24.tar.bz2 - 21.7MB of 21.7MB (100%)
building: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1
reporting: tools/rtems-binutils-2.24-1.cfg -> i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-binutils-2.24-1.cfg -> i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1.xml
config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg
package: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1
download: ftp://ftp.gnu.org/gnu/gcc/gcc-4.9.3/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2
downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%)
download: ftp://sourceware.org/pub/newlib/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz
downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%)
download: http://www.mpfr.org/mpfr-3.0.1/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2
downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%)
download: http://www.multiprecision.org/mpc/download/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz
downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%)
download: ftp://ftp.gnu.org/gnu/gmp/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2
downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%)
building: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg ->
i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1.xml
config: tools/rtems-gdb-7.9-1.cfg
package: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1
download: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.11/gdb/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
download: https://git.rtems.org/rtems-tools/plain/tools/4.11/gdb/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
building: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1
reporting: tools/rtems-gdb-7.9-1.cfg ->
i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1.txt
reporting: tools/rtems-gdb-7.9-1.cfg ->
i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1.xml
config: tools/rtems-tools-4.11-1.cfg
package: rtems-tools-4.11-1
Creating source directory: sources/git
git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
git: reset: git://git.rtems.org/rtems-tools.git
git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
git: checkout: git://git.rtems.org/rtems-tools.git => 4.11
git: pull: git://git.rtems.org/rtems-tools.git
building: rtems-tools-4.11-1
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11-1.txt
reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11-1.xml
config: tools/rtems-kernel-4.11.cfg
installing: expat-2.1.0-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1 -> C:\opt\rtems\4.11
installing: rtems-tools-4.11-1 -> C:\opt\rtems\4.11
cleaning: expat-2.1.0-x86_64-w64-mingw32-1
cleaning: i386-rtems4.11-binutils-2.24-x86_64-w64-mingw32-1
cleaning: i386-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-w64-mingw32-1
cleaning: i386-rtems4.11-gdb-7.9-x86_64-w64-mingw32-1
cleaning: rtems-tools-4.11-1
Build Set: Time 1:32:58.972919
 /c/opt/rtems/rsb/rtems
$

5.3.2.2. Building the Kernel

We can now build the RTEMS kernel using the RTEMS tools we have just built. First we need to set the path to the tools:

 /c
$ cd /c/opt/rtems
 /c/opt/rtems
$ export PATH=/c/opt/rtems/4.11/bin:$PATH
 /c/opt/rtems
$

We currently build RTEMS from the git release branch for 4.11:

 /c/opt/rtems
$ mkdir kernel
 /c/opt/rtems
$ cd kernel
 /c/opt/rtems/kernel
$ git clone git://git.rtems.org/rtems.git rtems
Cloning into 'rtems'...
remote: Counting objects: 482766, done.
remote: Compressing objects: 100% (88781/88781), done.
remote: Total 482766 (delta 389610), reused 475155 (delta 383437)
Receiving objects: 100% (482766/482766), 69.77 MiB | 697.00 KiB/s, done.
Resolving deltas: 100% (389610/389610), done.
Checking connectivity... done.
Checking out files: 100% (10626/10626), done.
 /c/opt/rtems/kernel
$ cd rtems
 /c/opt/rtems/kernel/rtems
$ git checkout 4.11
Checking out files: 100% (2553/2553), done.
Branch 4.11 set up to track remote branch 4.11 from origin.
Switched to a new branch '4.11'
 /c/opt/rtems/kernel
$

The kernel code cloned from git needs to be bootstrapped. Bootstrapping creates autoconf and automake generated files. To bootstrap we first clean away any files, then generate the pre-install header file lists and finally we generate the autoconf and automake files using the RSB’s bootstrap tool. First we clean any generated files that exist:

 /c/opt/rtems/kernel/rtems
$ ./bootstrap -c
removing automake generated Makefile.in files
removing configure files
removing aclocal.m4 files

Then we generate the pre-install header file automake make files:

 /c/opt/rtems/kernel/rtems
$ ./bootstrap -p
Generating ./c/src/ada/preinstall.am
Generating ./c/src/lib/libbsp/arm/altera-cyclone-v/preinstall.am
Generating ./c/src/lib/libbsp/arm/atsam/preinstall.am
Generating ./c/src/lib/libbsp/arm/beagle/preinstall.am
Generating ./c/src/lib/libbsp/arm/csb336/preinstall.am
Generating ./c/src/lib/libbsp/arm/csb337/preinstall.am
Generating ./c/src/lib/libbsp/arm/edb7312/preinstall.am
Generating ./c/src/lib/libbsp/arm/gdbarmsim/preinstall.am
  .......
Generating ./cpukit/score/cpu/mips/preinstall.am
Generating ./cpukit/score/cpu/moxie/preinstall.am
Generating ./cpukit/score/cpu/nios2/preinstall.am
Generating ./cpukit/score/cpu/no_cpu/preinstall.am
Generating ./cpukit/score/cpu/or1k/preinstall.am
Generating ./cpukit/score/cpu/powerpc/preinstall.am
Generating ./cpukit/score/cpu/sh/preinstall.am
Generating ./cpukit/score/cpu/sparc/preinstall.am
Generating ./cpukit/score/cpu/sparc64/preinstall.am
Generating ./cpukit/score/cpu/v850/preinstall.am
Generating ./cpukit/score/preinstall.am
Generating ./cpukit/telnetd/preinstall.am
Generating ./cpukit/wrapup/preinstall.am
Generating ./cpukit/zlib/preinstall.am
 /c/opt/rtems/kernel/rtems

Finally we run the RSB’s parallel bootstrap command:

$ /c/opt/rtems/rsb/source-builder/sb-bootstrap
RTEMS Source Builder - RTEMS Bootstrap, 4.11 (76188ee494dd)
  1/139: autoreconf: configure.ac
  2/139: autoreconf: c/configure.ac
  3/139: autoreconf: c/src/configure.ac
  4/139: autoreconf: c/src/ada-tests/configure.ac
  5/139: autoreconf: c/src/lib/libbsp/arm/configure.ac
  6/139: autoreconf: c/src/lib/libbsp/arm/altera-cyclone-v/configure.ac
  7/139: autoreconf: c/src/lib/libbsp/arm/atsam/configure.ac
  8/139: autoreconf: c/src/lib/libbsp/arm/beagle/configure.ac
  9/139: autoreconf: c/src/lib/libbsp/arm/csb336/configure.ac
 10/139: autoreconf: c/src/lib/libbsp/arm/csb337/configure.ac
 11/139: autoreconf: c/src/lib/libbsp/arm/edb7312/configure.ac
  .......
129/139: autoreconf: testsuites/samples/configure.ac
130/139: autoreconf: testsuites/smptests/configure.ac
131/139: autoreconf: testsuites/sptests/configure.ac
132/139: autoreconf: testsuites/tmtests/configure.ac
133/139: autoreconf: testsuites/tools/configure.ac
134/139: autoreconf: testsuites/tools/generic/configure.ac
135/139: autoreconf: tools/build/configure.ac
136/139: autoreconf: tools/cpu/configure.ac
137/139: autoreconf: tools/cpu/generic/configure.ac
138/139: autoreconf: tools/cpu/nios2/configure.ac
139/139: autoreconf: tools/cpu/sh/configure.ac
Bootstrap time: 0:20:38.759766
 /c/opt/rtems/kernel/rtems
$

We will build the RTEMS kernel for the i386 target and the pc686 BSP. You can check the available BSPs by running the rtems-bsps command found in the top directory of the RTEMS kernel source. We build the Board Support Package (BSP) outside the kernel source tree:

 /c/opt/rtems/kernel/rtems
$ cd ..
 /c/opt/rtems/kernel
$ mkdir pc686
 /c/opt/rtems/kernel
$ cd pc686
 /c/opt/rtems/kernel/pc686
$

Configure the RTEMS kernel to build pc686 BSP for the i386 target with networking disabled, We will build the external libBSD stack later:

 /c/opt/rtems/kernel/pc686
$ /c/opt/rtems/kernel/rtems/configure --prefix=/c/opt/rtems/4.11 \
       --target=i386-rtems4.11 --disable-networking --enable-rtemsbsp=pc686
checking for gmake... no
checking for make... make
checking for RTEMS Version... 4.11.99.0
checking build system type... x86_64-pc-mingw64
checking host system type... x86_64-pc-mingw64
checking target system type... i386-pc-rtems4.11
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking that generated files are newer than configure... done
configure: creating ./config.status
configure: configuring in ./tools/build
  .......
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile

target architecture: i386.
available BSPs: pc686.
'make all' will build the following BSPs: pc686.
other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."'

config.status: creating Makefile
 /c/opt/rtems/kernel/pc686
$

Build the kernel:

 /c/opt/rtems/kernel/pc686
$ make
Making all in tools/build
make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
make  all-am
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
gcc -DHAVE_CONFIG_H -I. -I/c/opt/rtems/kernel/rtems/tools/build     -g -O2 -MT
cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o
/c/opt/rtems/kernel/rtems/tools/build/cklength.c
gcc -DHAVE_CONFIG_H -I. -I/c/opt/rtems/kernel/rtems/tools/build     -g -O2 -MT
eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o
/c/opt/rtems/kernel/rtems/tools/build/eolstrip.c
  ..........
i386-rtems4.11-objcopy -O binary nsecs.nxe nsecs.bin
../../../../../pc686/build-tools/bin2boot -v nsecs.ralf 0x00097E00
../../../../../pc686/lib/start16.bin 0x00097C00 0 nsecs.bin 0x00100000 0
header address       0x00097e00, its memory size 0xzx
first  image address 0x00097c00, its memory size 0x00000200
second image address 0x00100000, its memory size 0x0003d800
rm -f nsecs.nxe
make[6]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples/nsecs'
make[5]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples'
make[4]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites/samples'
make[4]: Entering directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites'
make[3]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686/testsuites'
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c/pc686'
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686/i386-rtems4.11/c'
make[1]: Entering directory '/c/opt/rtems/kernel/pc686'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686'
 /c/opt/rtems/kernel/pc696
$

Install the kernel to our prefix:

 /c/opt/rtems/kernel/pc686
$ make install
Making install in tools/build
make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/build'
 /usr/bin/mkdir -p '/c/opt/rtems/4.11/bin'
  /usr/bin/install -c cklength.exe eolstrip.exe packhex.exe unhex.exe
  rtems-bin2c.exe '/c/opt/rtems/4.11/bin'
 /usr/bin/mkdir -p '/c/opt/rtems/4.11/bin'
 /usr/bin/install -c install-if-change '/c/opt/rtems/4.11/bin'
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/build'
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/build'
Making install in tools/cpu
make[1]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu'
Making install in generic
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[3]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686/tools/cpu/generic'
make[2]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu'
make[3]: Entering directory '/c/opt/rtems/kernel/pc686/tools/cpu'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
  ..........
make[2]: Entering directory '/c/opt/rtems/kernel/pc686'
make[2]: Nothing to be done for 'install-exec-am'.
 /usr/bin/mkdir -p '/c/opt/rtems/4.11/make'
 /usr/bin/install -c -m 644 /c/opt/rtems/kernel/rtems/make/main.cfg
 /c/opt/rtems/kernel/rtems/make/leaf.cfg '/c/opt/rtems/4.11/make'
 /usr/bin/mkdir -p '/c/opt/rtems/4.11/share/rtems4.11/make/Templates'
 /usr/bin/install -c -m 644
 /c/opt/rtems/kernel/rtems/make/Templates/Makefile.dir
 /c/opt/rtems/kernel/rtems/make/Templates/Makefile.leaf
 /c/opt/rtems/kernel/rtems/make/Templates/Makefile.lib
 '/c/opt/rtems/4.11/share/rtems4.11/make/Templates'
 /usr/bin/mkdir -p '/c/opt/rtems/4.11/make/custom'
 /usr/bin/install -c -m 644 /c/opt/rtems/kernel/rtems/make/custom/default.cfg
 '/c/opt/rtems/4.11/make/custom'
make[2]: Leaving directory '/c/opt/rtems/kernel/pc686'
make[1]: Leaving directory '/c/opt/rtems/kernel/pc686'
 /c/opt/rtems/kernel/pc686
$

5.4. RTEMS Kernel

RTEMS is an open source real-time operating system. As a user you have access to all the source code. The RTEMS Kernel section will show you how you build the RTEMS kernel on your host.

5.4.1. Development Sources

Create a new location to build the RTEMS kernel:

$ cd
$ cd development/rtems
$ mkdir kernel
$ cd kernel

Clone the RTEMS respository:

$ git clone git://git.rtems.org/rtems.git rtems
Cloning into 'rtems'...
remote: Counting objects: 483342, done.
remote: Compressing objects: 100% (88974/88974), done.
remote: Total 483342 (delta 390053), reused 475669 (delta 383809)
Receiving objects: 100% (483342/483342), 69.88 MiB | 1.37 MiB/s, done.
Resolving deltas: 100% (390053/390053), done.
Checking connectivity... done.

5.4.2. Tools Path Set Up

We need to set our path to include the RTEMS tools we built in the previous section. The RTEMS tools needs to be first in your path because RTEMS provides specific versions of the autoconf and automake tools. We want to use the RTEMS version and not your host’s versions:

$ export PATH=$HOME/development/rtems/4.12/bin:$PATH

5.4.3. Bootstrapping

The developers version of the code from git requires we bootstrap the source code. This is an autoconf and automake bootstrap to create the various files generated by autoconf and automake. RTEMS does not keep these generated files under version control. The bootstrap process is slow so to speed it up the RSB provides a command that can perform the bootstrap in parallel using your available cores. We need to enter the cloned source directory then run the bootsrap commands:

$ cd rtems
$ ./bootstrap -c && ./bootstrap -p && \
            $HOME/development/rtems/rsb/source-builder/sb-bootstrap
removing automake generated Makefile.in files
removing configure files
removing aclocal.m4 files
Generating ./cpukit/dtc/libfdt/preinstall.am
Generating ./cpukit/zlib/preinstall.am
Generating ./cpukit/libdl/preinstall.am
Generating ./cpukit/posix/preinstall.am
Generating ./cpukit/pppd/preinstall.am
Generating ./cpukit/librpc/preinstall.am
Generating ./cpukit/preinstall.am
Generating ./cpukit/sapi/preinstall.am
Generating ./cpukit/score/preinstall.am
Generating ./cpukit/score/cpu/mips/preinstall.am
Generating ./cpukit/score/cpu/sh/preinstall.am
Generating ./cpukit/score/cpu/sparc/preinstall.am
Generating ./cpukit/score/cpu/no_cpu/preinstall.am
Generating ./cpukit/score/cpu/arm/preinstall.am
Generating ./cpukit/score/cpu/m32c/preinstall.am
Generating ./cpukit/score/cpu/moxie/preinstall.am
Generating ./cpukit/score/cpu/v850/preinstall.am
Generating ./cpukit/score/cpu/sparc64/preinstall.am
Generating ./cpukit/score/cpu/or1k/preinstall.am
Generating ./cpukit/score/cpu/i386/preinstall.am
Generating ./cpukit/score/cpu/nios2/preinstall.am
Generating ./cpukit/score/cpu/epiphany/preinstall.am
Generating ./cpukit/score/cpu/m68k/preinstall.am
Generating ./cpukit/score/cpu/lm32/preinstall.am
Generating ./cpukit/score/cpu/powerpc/preinstall.am
Generating ./cpukit/score/cpu/bfin/preinstall.am
Generating ./cpukit/libpci/preinstall.am
Generating ./cpukit/libcrypt/preinstall.am
Generating ./cpukit/rtems/preinstall.am
Generating ./cpukit/telnetd/preinstall.am
Generating ./cpukit/libnetworking/preinstall.a
 ......
Generating ./c/src/lib/libbsp/powerpc/gen5200/preinstall.am
Generating ./c/src/lib/libbsp/powerpc/mpc55xxevb/preinstall.am
Generating ./c/src/lib/libbsp/bfin/TLL6527M/preinstall.am
Generating ./c/src/lib/libbsp/bfin/bf537Stamp/preinstall.am
Generating ./c/src/lib/libbsp/bfin/eZKit533/preinstall.am
Generating ./c/src/librtems++/preinstall.am
Generating ./c/src/libchip/preinstall.am
Generating ./c/src/wrapup/preinstall.am
Generating ./c/src/ada/preinstall.am
RTEMS Source Builder - RTEMS Bootstrap, 4.12 (e645642255cc modified)
  1/139: autoreconf: configure.ac
  2/139: autoreconf: cpukit/configure.ac
  3/139: autoreconf: tools/cpu/configure.ac
  4/139: autoreconf: tools/cpu/generic/configure.ac
  5/139: autoreconf: tools/cpu/sh/configure.ac
  6/139: autoreconf: tools/cpu/nios2/configure.ac
  7/139: autoreconf: tools/build/configure.ac
  8/139: autoreconf: doc/configure.ac
 ......
124/139: autoreconf: c/src/make/configure.ac
125/139: autoreconf: c/src/librtems++/configure.ac
126/139: autoreconf: c/src/ada-tests/configure.ac
127/139: autoreconf: testsuites/configure.ac
128/139: autoreconf: testsuites/libtests/configure.ac
129/139: autoreconf: testsuites/mptests/configure.ac
130/139: autoreconf: testsuites/fstests/configure.ac
131/139: autoreconf: testsuites/sptests/configure.ac
132/139: autoreconf: testsuites/tmtests/configure.ac
133/139: autoreconf: testsuites/smptests/configure.ac
134/139: autoreconf: testsuites/tools/configure.ac
135/139: autoreconf: testsuites/tools/generic/configure.ac
136/139: autoreconf: testsuites/psxtests/configure.ac
137/139: autoreconf: testsuites/psxtmtests/configure.ac
138/139: autoreconf: testsuites/rhealstone/configure.ac
139/139: autoreconf: testsuites/samples/configure.ac
Bootstrap time: 0:02:47.398824

5.4.4. Building a BSP

We build RTEMS in a directory outside of the source tree we have just cloned and bootstrapped. You cannot build RTEMS while in the source tree. Lets create a suitable directory using the name of the BSP we are going to build:

$ cd ..
$ mkdir erc32
$ cd erc32

Configure RTEMS using the configure command. We use a full path to configure so the object files built contain the absolute path of the source files. If you are source level debugging you will be able to access the source code to RTEMS from the debugger. We will build for the erc32 BSP with POSIX enabled and the networking stack disabled:

$ $HOME/development/rtems/kernel/rtems/configure --prefix=$HOME/development/rtems/4.12 \
                   --target=sparc-rtems4.12 --enable-rtemsbsp=erc32 --enable-posix \
                   --disable-networking
checking for gmake... no
checking for make... make
checking for RTEMS Version... 4.11.99.0
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... sparc-unknown-rtems4.12
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking that generated files are newer than configure... done
 ......
checking target system type... sparc-unknown-rtems4.12
checking rtems target cpu... sparc
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for sparc-rtems4.12-strip... sparc-rtems4.12-strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile

target architecture: sparc.
available BSPs: erc32.
'make all' will build the following BSPs: erc32.
other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."'

config.status: creating Makefile

Build RTEMS using two cores:

$ make -j 2
Making all in tools/build
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
make  all-am
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build     -g -O2 -MT cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o /home/chris/development/rtems/kernel/rtems/tools/build/cklength.c
gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build     -g -O2 -MT eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o /home/chris/development/rtems/kernel/rtems/tools/build/eolstrip.c
mv -f .deps/cklength.Tpo .deps/cklength.Po
mv -f .deps/eolstrip.Tpo .deps/eolstrip.Po
gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build     -g -O2 -MT compat.o -MD -MP -MF .deps/compat.Tpo -c -o compat.o /home/chris/development/rtems/kernel/rtems/tools/build/compat.c
gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build     -g -O2 -MT packhex.o -MD -MP -MF .deps/packhex.Tpo -c -o packhex.o /home/chris/development/rtems/kernel/rtems/tools/build/packhex.c
mv -f .deps/compat.Tpo .deps/compat.Po
gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build     -g -O2 -MT unhex.o -MD -MP -MF .deps/unhex.Tpo -c -o unhex.o /home/chris/development/rtems/kernel/rtems/tools/build/unhex.c
mv -f .deps/packhex.Tpo .deps/packhex.Po
gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build     -g -O2 -MT rtems-bin2c.o -MD -MP -MF .deps/rtems-bin2c.Tpo -c -o rtems-bin2c.o /home/chris/development/rtems/kernel/rtems/tools/build/rtems-bin2c.c
mv -f .deps/unhex.Tpo .deps/unhex.Po
gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build     -g -O2 -MT binpatch.o -MD -MP -MF .deps/binpatch.Tpo -c -o binpatch.o /home/chris/development/rtems/kernel/rtems/tools/build/binpatch.c
mv -f .deps/rtems-bin2c.Tpo .deps/rtems-bin2c.Po
gcc  -g -O2   -o cklength cklength.o
mv -f .deps/binpatch.Tpo .deps/binpatch.Po
gcc  -g -O2   -o eolstrip eolstrip.o compat.o
gcc  -g -O2   -o packhex packhex.o
gcc  -g -O2   -o rtems-bin2c rtems-bin2c.o compat.o
gcc  -g -O2   -o unhex unhex.o compat.o
gcc  -g -O2   -o binpatch binpatch.o
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
Making all in tools/cpu
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
Making all in generic
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
Making all in testsuites/tools
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
Making all in generic
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
make[2]: Nothing to be done for 'all-am'.
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
Making all in sparc-rtems4.12/c
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
Making all in .
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
Configuring RTEMS_BSP=erc32
checking for gmake... no
checking for make... make
checking build system type... x86_64-pc-linux-gnu
checking host system type... sparc-unknown-rtems4.12
 ......
sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include   -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT init.o -MD -MP -MF .deps/init.Tpo -c -o init.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/init.c
sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include   -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT empty.o -MD -MP -MF .deps/empty.Tpo -c -o empty.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/empty.c
mv -f .deps/empty.Tpo .deps/empty.Po
mv -f .deps/init.Tpo .deps/init.Po
sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -Wl,--gc-sections  -mcpu=cypress   -o nsecs.exe init.o empty.o
sparc-rtems4.12-nm -g -n nsecs.exe > nsecs.num
sparc-rtems4.12-size nsecs.exe
   text    data     bss     dec     hex filename
 121392    1888    6624  129904   1fb70 nsecs.exe
cp nsecs.exe nsecs.ralf
make[6]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites/samples/nsecs'
make[5]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites/samples'
make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites/samples'
make[4]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites'
make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites'
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32'
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
make[1]: Nothing to be done for 'all-am'.
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'

5.4.5. Installing A BSP

All that remains to be done is to install the kernel. Installing RTEMS copies the API headers and architecture specific libraries to a locaiton under the prefix you provide. You can install any number of BSPs under the same prefix. We recommend you have a separate prefix for different versions of RTEMS. Do not mix versions of RTEMS under the same prefix. Make installs RTEMS with the following command:

$ make install
Making install in tools/build
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
/bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
/usr/bin/install -c cklength eolstrip packhex unhex rtems-bin2c '/home/chris/development/rtems/4.12/bin'
/bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
/usr/bin/install -c install-if-change '/home/chris/development/rtems/4.12/bin'
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
Making install in tools/cpu
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
Making install in generic
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu
 ......
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32'
make[2]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/home/chris/development/rtems/4.12/make'
/usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/main.cfg /home/chris/development/rtems/kernel/rtems/make/leaf.cfg '/home/chris/development/rtems/4.12/make'
/bin/mkdir -p '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
/usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.dir /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.leaf /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.lib '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
/bin/mkdir -p '/home/chris/development/rtems/4.12/make/custom'
/usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/custom/default.cfg '/home/chris/development/rtems/4.12/make/custom'
make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'

5.4.6. Contributing Patches

RTEMS welcomes fixes to bugs and new features. The RTEMS Project likes to have bugs fixed against a ticket created on our Developer Site. Please raise a ticket if you have a bug. Any changes that are made can be tracked against the ticket. If you want to add a new a feature please post a message to Developers Mailing List describing what you would like to implement. The RTEMS maintainer will help decide if the feature is in the best interest of the project. Not everything is and the maintainers need to evalulate how much effort it is to maintain the feature. Once accepted into the source tree it becomes the responsibility of the maintainers to keep the feature updated and working.

Changes to the source tree are tracked using git. If you have not made changes and enter the source tree and enter a git status command you will see nothing has changed:

$ cd ../rtems
$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
nothing to commit, working directory clean

We will make a change to the source code. In this example I change the help message to the RTEMS shell’s halt command. Running the same git status command reports:

$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)

        modified:   cpukit/libmisc/shell/main_halt.c

no changes added to commit (use "git add" and/or "git commit -a")

As an example I have a ticket open and the ticket number is 9876. I commit the change with the follow git command:

$ git commit cpukit/libmisc/shell/main_halt.c

An editor is opened and I enter my commit message. The first line is a title and the following lines form a body. My message is:

shell: Add more help detail to the halt command.

Closes #9876.

# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
# Explicit paths specified without -i or -o; assuming --only paths...
#
# Committer: Chris Johns <chrisj@rtems.org>
#
# On branch master
# Your branch is up-to-date with 'origin/master'.
#
# Changes to be committed:
#       modified:   cpukit/libmisc/shell/main_halt.c

When you save and exit the editor git will report the commit’s status:

$ git commit cpukit/libmisc/shell/main_halt.c
[master 9f44dc9] shell: Add more help detail to the halt command.
 1 file changed, 1 insertion(+), 1 deletion(-)

You can either email the patch to Developers Mailing List with the following git command, and it is minus one on the command line:

$ git send-email --to=devel@rtems.org -1
 <add output here>

Or you can ask git to create a patch file using:

$ git format-patch -1
0001-shell-Add-more-help-detail-to-the-halt-command.patch

This patch can be attached to a ticket.