6. RTEMS Specific Commands¶

6.2.1. shutdown - Shutdown the system¶

SYNOPSYS:

shutdown

DESCRIPTION:

This command is used to shutdown the RTEMS application.

EXIT STATUS:

This command does not return.

NOTES:

NONE

EXAMPLES:

The following is an example of how to use shutdown:

SHLL [/] $ shutdown
System shutting down at user request

The user will not see another prompt and the system will shutdown.

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_SHUTDOWN to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_SHUTDOWN when all shell commands have been configured.

PROGRAMMING INFORMATION:

The configuration structure for the shutdown has the following prototype:

extern rtems_shell_cmd_t rtems_shell_SHUTDOWN_Command;

6.2.2. cpuuse - print or reset per thread cpu usage¶

SYNOPSYS:

cpuuse [-r]

DESCRIPTION:

This command may be used to print a report on the per thread cpu usage or to reset the per thread CPU usage statistics. When invoked with the -r option, the CPU usage statistics are reset.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

The granularity of the timing information reported is dependent upon the BSP and the manner in which RTEMS was built. In the default RTEMS configuration, if the BSP supports nanosecond granularity timestamps, then the information reported will be highly accurate. Otherwise, the accuracy of the information reported is limited by the clock tick quantum.

EXAMPLES:

The following is an example of how to use cpuuse:

SHLL [/] $ cpuuse
CPU Usage by thread
ID            NAME         SECONDS   PERCENT
0x09010001   IDLE            49.745393   98.953
0x0a010001   UI1              0.000000    0.000
0x0a010002   SHLL             0.525928    1.046
Time since last CPU Usage reset 50.271321 seconds
SHLL [/] $ cpuuse -r
Resetting CPU Usage information
SHLL [/] $ cpuuse
CPU Usage by thread
ID            NAME         SECONDS   PERCENT
0x09010001   IDLE             0.000000    0.000
0x0a010001   UI1              0.000000    0.000
0x0a010002   SHLL             0.003092  100.000
Time since last CPU Usage reset 0.003092 seconds

In the above example, the system had set idle for nearly a minute when the first report was generated. The``cpuuse -r`` and cpuuse commands were pasted from another window so were executed with no gap between. In the second report, only the shell thread has run since the CPU Usage was reset. It has consumed approximately 3.092 milliseconds of CPU time processing the two commands and generating the output.

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_CPUUSE to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_CPUUSE when all shell commands have been configured.

PROGRAMMING INFORMATION:

The cpuuse is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_cpuuse(
   int    argc,
   char **argv
);

The configuration structure for the cpuuse has the following prototype:

extern rtems_shell_cmd_t rtems_shell_CPUUSE_Command;

6.2.3. stackuse - print per thread stack usage¶

SYNOPSYS:

stackuse

DESCRIPTION:

This command prints a Stack Usage Report for all of the tasks and threads in the system. On systems which support it, the usage of the interrupt stack is also included in the report.

EXIT STATUS:

This command always succeeds and returns 0.

NOTES:

The CONFIGURE_STACK_CHECKER_ENABLED confdefs.h constant must be defined when the application is configured for this command to have any information to report.

EXAMPLES:

The following is an example of how to use stackuse:

SHLL [/] $ stackuse
Stack usage by thread
ID      NAME    LOW          HIGH     CURRENT     AVAILABLE     USED
0x09010001  IDLE 0x023d89a0 - 0x023d99af 0x023d9760      4096        608
0x0a010001  UI1  0x023d9f30 - 0x023daf3f 0x023dad18      4096       1804
0x0a010002  SHLL 0x023db4c0 - 0x023df4cf 0x023de9d0     16384       5116
0xffffffff  INTR 0x023d2760 - 0x023d375f 0x00000000      4080        316

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_STACKUSE to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_STACKUSE when all shell commands have been configured.

PROGRAMMING INFORMATION:

The stackuse is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_stackuse(
    int    argc,
    char **argv
);

The configuration structure for the stackuse has the following prototype:

extern rtems_shell_cmd_t rtems_shell_STACKUSE_Command;

6.2.4. perioduse - print or reset per period usage¶

SYNOPSYS:

perioduse [-r]

DESCRIPTION:

This command may be used to print a statistics report on the rate monotonic periods in the application or to reset the rate monotonic period usage statistics. When invoked with the -r option, the usage statistics are reset.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

The granularity of the timing information reported is dependent upon the BSP and the manner in which RTEMS was built. In the default RTEMS configuration, if the BSP supports nanosecond granularity timestamps, then the information reported will be highly accurate. Otherwise, the accuracy of the information reported is limited by the clock tick quantum.

EXAMPLES:

The following is an example of how to use perioduse:

SHLL [/] $ perioduse
Period information by period
--- CPU times are in seconds ---
--- Wall times are in seconds ---
ID     OWNER COUNT MISSED          CPU TIME                  WALL TIME
MIN/MAX/AVG                MIN/MAX/AVG
0x42010001 TA1    502      0 0:000039/0:042650/0:004158 0:000039/0:020118/0:002848
0x42010002 TA2    502      0 0:000041/0:042657/0:004309 0:000041/0:020116/0:002848
0x42010003 TA3    501      0 0:000041/0:041564/0:003653 0:000041/0:020003/0:002814
0x42010004 TA4    501      0 0:000043/0:044075/0:004911 0:000043/0:020004/0:002814
0x42010005 TA5     10      0 0:000065/0:005413/0:002739 0:000065/1:000457/0:041058
MIN/MAX/AVG                MIN/MAX/AVG
SHLL [/] $ perioduse -r
Resetting Period Usage information
SHLL [/] $ perioduse
--- CPU times are in seconds ---
--- Wall times are in seconds ---
ID     OWNER COUNT MISSED          CPU TIME                  WALL TIME
MIN/MAX/AVG                MIN/MAX/AVG
0x42010001 TA1      0      0
0x42010002 TA2      0      0
0x42010003 TA3      0      0
0x42010004 TA4      0      0
0x42010005 TA5      0      0

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_PERIODUSE to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_PERIODUSE when all shell commands have been configured.

PROGRAMMING INFORMATION:

The perioduse is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_perioduse(
    int    argc,
    char **argv
);

The configuration structure for the perioduse has the following prototype:

extern rtems_shell_cmd_t rtems_shell_PERIODUSE_Command;

6.2.5. profreport - print a profiling report¶

SYNOPSYS:

profreport

DESCRIPTION:

This command may be used to print a profiling report if profiling is built into the RTEMS kernel.

EXIT STATUS:

This command returns 0.

NOTES:

Profiling must be enabled at build configuration time to get profiling information.

EXAMPLES:

The following is an example of how to use profreport:

SHLL [/] $ profreport
<ProfilingReport name="Shell">
<PerCPUProfilingReport processorIndex="0">
<MaxThreadDispatchDisabledTime unit="ns">10447</MaxThreadDispatchDisabledTime>
<MeanThreadDispatchDisabledTime unit="ns">2</MeanThreadDispatchDisabledTime>
<TotalThreadDispatchDisabledTime unit="ns">195926627</TotalThreadDispatchDisabledTime>
<ThreadDispatchDisabledCount>77908688</ThreadDispatchDisabledCount>
<MaxInterruptDelay unit="ns">0</MaxInterruptDelay>
<MaxInterruptTime unit="ns">688</MaxInterruptTime>
<MeanInterruptTime unit="ns">127</MeanInterruptTime>
<TotalInterruptTime unit="ns">282651157</TotalInterruptTime>
<InterruptCount>2215855</InterruptCount>
</PerCPUProfilingReport>
<PerCPUProfilingReport processorIndex="1">
<MaxThreadDispatchDisabledTime unit="ns">9053</MaxThreadDispatchDisabledTime>
<MeanThreadDispatchDisabledTime unit="ns">41</MeanThreadDispatchDisabledTime>
<TotalThreadDispatchDisabledTime unit="ns">3053830335</TotalThreadDispatchDisabledTime>
<ThreadDispatchDisabledCount>73334202</ThreadDispatchDisabledCount>
<MaxInterruptDelay unit="ns">0</MaxInterruptDelay>
<MaxInterruptTime unit="ns">57</MaxInterruptTime>
<MeanInterruptTime unit="ns">35</MeanInterruptTime>
<TotalInterruptTime unit="ns">76980203</TotalInterruptTime>
<InterruptCount>2141179</InterruptCount>
</PerCPUProfilingReport>
<SMPLockProfilingReport name="SMP lock stats">
<MaxAcquireTime unit="ns">608</MaxAcquireTime>
<MaxSectionTime unit="ns">1387</MaxSectionTime>
<MeanAcquireTime unit="ns">112</MeanAcquireTime>
<MeanSectionTime unit="ns">338</MeanSectionTime>
<TotalAcquireTime unit="ns">119031</TotalAcquireTime>
<TotalSectionTime unit="ns">357222</TotalSectionTime>
<UsageCount>1055</UsageCount>
<ContentionCount initialQueueLength="0">1055</ContentionCount>
<ContentionCount initialQueueLength="1">0</ContentionCount>
<ContentionCount initialQueueLength="2">0</ContentionCount>
<ContentionCount initialQueueLength="3">0</ContentionCount>
</SMPLockProfilingReport>
<SMPLockProfilingReport name="Giant">
<MaxAcquireTime unit="ns">4186</MaxAcquireTime>
<MaxSectionTime unit="ns">7575</MaxSectionTime>
<MeanAcquireTime unit="ns">160</MeanAcquireTime>
<MeanSectionTime unit="ns">183</MeanSectionTime>
<TotalAcquireTime unit="ns">1772793111</TotalAcquireTime>
<TotalSectionTime unit="ns">2029733879</TotalSectionTime>
<UsageCount>11039140</UsageCount>
<ContentionCount initialQueueLength="0">11037655</ContentionCount>
<ContentionCount initialQueueLength="1">1485</ContentionCount>
<ContentionCount initialQueueLength="2">0</ContentionCount>
<ContentionCount initialQueueLength="3">0</ContentionCount>
</SMPLockProfilingReport>
</ProfilingReport>

CONFIGURATION:

When building a custom command set, define CONFIGURE_SHELL_COMMAND_PROFREPORT to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_PROFREPORT when all shell commands have been configured.

PROGRAMMING INFORMATION:

The configuration structure for the profreport has the following prototype:

extern rtems_shell_cmd_t rtems_shell_PROFREPORT_Command;

6.2.6. wkspace - display information on executive workspace¶

SYNOPSYS:

wkspace

DESCRIPTION:

This command prints information on the current state of the RTEMS Executive Workspace reported. This includes the following information:

• Number of free blocks
• Largest free block
• Total bytes free
• Number of used blocks
• Largest used block
• Total bytes used

EXIT STATUS:

This command always succeeds and returns 0.

NOTES:

NONE

EXAMPLES:

The following is an example of how to use wkspace:

SHLL [/] $ wkspace
Number of free blocks: 1
Largest free block:    132336
Total bytes free:      132336
Number of used blocks: 36
Largest used block:    16408
Total bytes used:      55344

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_WKSPACE to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_WKSPACE when all shell commands have been configured.

PROGRAMMING INFORMATION:

The wkspace is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_wkspace(
    int    argc,
    char **argv
);

The configuration structure for the wkspace has the following prototype:

extern rtems_shell_cmd_t rtems_shell_WKSPACE_Command;

6.2.7. config - show the system configuration.¶

SYNOPSYS:

config

DESCRIPTION:

This command display information about the RTEMS Configuration.

EXIT STATUS:

This command always succeeds and returns 0.

NOTES:

At this time, it does not report every configuration parameter. This is an area in which user submissions or sponsorship of a developer would be appreciated.

EXAMPLES:

The following is an example of how to use config:

SHLL [/] $ config
INITIAL (startup) Configuration Info

WORKSPACE      start: 0x23d22e0;  size: 0x2dd20
TIME           usec/tick: 10000;  tick/timeslice: 50;  tick/sec: 100
MAXIMUMS       tasks: 20;  timers: 0;  sems: 50;  que's: 20;  ext's: 1
partitions: 0;  regions: 0;  ports: 0;  periods: 0

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_CONFIG to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_CONFIG when all shell commands have been configured.

PROGRAMMING INFORMATION:

The config is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_config(
    int    argc,
    char **argv
);

The configuration structure for the config has the following prototype:

extern rtems_shell_cmd_t rtems_shell_CONFIG_Command;

6.2.8. itask - list init tasks for the system¶

SYNOPSYS:

itask

DESCRIPTION:

This command prints a report on the set of initialization tasks and threads in the system.

EXIT STATUS:

This command always succeeds and returns 0.

NOTES:

At this time, it includes only Classic API Initialization Tasks. This is an area in which user submissions or sponsorship of a developer would be appreciated.

EXAMPLES:

The following is an example of how to use itask:

SHLL [/] $ itask
#    NAME   ENTRY        ARGUMENT    PRIO   MODES  ATTRIBUTES   STACK SIZE
------------------------------------------------------------------------------
0   UI1    [0x2002258] 0 [0x0]        1    nP      DEFAULT     4096 [0x1000]

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_ITASK to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_ITASK when all shell commands have been configured.

PROGRAMMING INFORMATION:

The itask is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_itask(
    int    argc,
    char **argv
);

The configuration structure for the itask has the following prototype:

extern rtems_shell_cmd_t rtems_shell_ITASK_Command;

6.2.9. extension - display information about extensions¶

SYNOPSYS:

extension [id [id ...]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of User Extensions currently active in the system.

If invoked with a set of ids as arguments, then just those objects are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of using the extension command on a system with no user extensions.

SHLL [/] $ extension
ID       NAME
------------------------------------------------------------------------------

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_EXTENSION to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_EXTENSION when all shell commands have been configured.

PROGRAMMING INFORMATION:

The extension is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_extension(
    int    argc,
    char **argv
);

The configuration structure for the extension has the following prototype:

extern rtems_shell_cmd_t rtems_shell_EXTENSION_Command;

6.2.10. task - display information about tasks¶

SYNOPSYS:

task [id [id ...]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of Classic API Tasks currently active in the system.

If invoked with a set of ids as arguments, then just those objects are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of how to use the task on an application with just two Classic API tasks:

SHLL [/] $ task
ID       NAME   PRIO   STAT   MODES  EVENTS   WAITID  WAITARG  NOTES
------------------------------------------------------------------------------
0a010001   UI1      1   SUSP   P:T:nA  NONE
0a010002   SHLL   100   READY  P:T:nA  NONE

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_TASK to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_TASK when all shell commands have been configured.

PROGRAMMING INFORMATION:

The task is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_task(
    int    argc,
    char **argv
);

The configuration structure for the task has the following prototype:

extern rtems_shell_cmd_t rtems_shell_TASK_Command;

6.2.11. queue - display information about message queues¶

SYNOPSYS:

queue [id [id ... ]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of Classic API Message Queues currently active in the system.

If invoked with a set of ids as arguments, then just those objects are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of using the queue command on a system with no Classic API Message Queues.

SHLL [/] $ queue
ID       NAME   ATTRIBUTES   PEND   MAXPEND  MAXSIZE
------------------------------------------------------------------------------

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_QUEUE to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_QUEUE when all shell commands have been configured.

PROGRAMMING INFORMATION:

The queue is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_queue(
    int    argc,
    char **argv
);

The configuration structure for the queue has the following prototype:

extern rtems_shell_cmd_t rtems_shell_QUEUE_Command;

6.2.12. sema - display information about semaphores¶

SYNOPSYS:

sema [id [id ... ]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of Classic API Semaphores currently active in the system.

If invoked with a set of objects ids as arguments, then just those objects are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of how to use sema:

SHLL [/] $ sema
ID       NAME   ATTR        PRICEIL CURR_CNT HOLDID
------------------------------------------------------------------------------
1a010001   LBIO   PR:BI:IN      0        1     00000000
1a010002   TRmi   PR:BI:IN      0        1     00000000
1a010003   LBI00  PR:BI:IN      0        1     00000000
1a010004   TRia   PR:BI:IN      0        1     00000000
1a010005   TRoa   PR:BI:IN      0        1     00000000
1a010006   TRxa   <assoc.c: BAD NAME>   0    0 09010001
1a010007   LBI01  PR:BI:IN      0        1     00000000
1a010008   LBI02  PR:BI:IN      0        1     00000000

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_SEMA to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_SEMA when all shell commands have been configured.

PROGRAMMING INFORMATION:

The sema is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_sema(
    int    argc,
    char **argv
);

The configuration structure for the sema has the following prototype:

extern rtems_shell_cmd_t rtems_shell_SEMA_Command;

6.2.13. region - display information about regions¶

SYNOPSYS:

region [id [id ... ]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of Classic API Regions currently active in the system.

If invoked with a set of object ids as arguments, then just those object are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of using the region command on a system with no user extensions.

SHLL [/] $ region
ID       NAME   ATTR        STARTADDR LENGTH    PAGE_SIZE USED_BLOCKS
------------------------------------------------------------------------------

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_REGION to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_REGION when all shell commands have been configured.

PROGRAMMING INFORMATION:

The region is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_region(
    int    argc,
    char **argv
);

The configuration structure for the region has the following prototype:

extern rtems_shell_cmd_t rtems_shell_REGION_Command;

6.2.14. part - display information about partitions¶

SYNOPSYS:

part [id [id ... ]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of Classic API Partitions currently active in the system.

If invoked with a set of object ids as arguments, then just those objects are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of using the part command on a system with no user extensions.

SHLL [/] $ part
ID       NAME   ATTR        STARTADDR LENGTH    BUF_SIZE  USED_BLOCKS
------------------------------------------------------------------------------

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_PART to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_PART when all shell commands have been configured.

PROGRAMMING INFORMATION:

The part is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_part(
    int    argc,
    char **argv
);

The configuration structure for the part has the following prototype:

extern rtems_shell_cmd_t rtems_shell_PART_Command;

6.2.15. object - display information about RTEMS objects¶

SYNOPSYS:

object [id [id ...]]

DESCRIPTION:

When invoked with a set of object ids as arguments, then a report on those objects is printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of how to use object:

SHLL [/] $ object 0a010001 1a010002
ID       NAME   PRIO   STAT   MODES  EVENTS   WAITID  WAITARG  NOTES
------------------------------------------------------------------------------
0a010001   UI1      1   SUSP   P:T:nA  NONE
ID       NAME   ATTR        PRICEIL CURR_CNT HOLDID
------------------------------------------------------------------------------
1a010002   TRmi   PR:BI:IN      0        1     00000000

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_OBJECT to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_OBJECT when all shell commands have been configured.

PROGRAMMING INFORMATION:

The object is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_object(
    int    argc,
    char **argv
);

The configuration structure for the object has the following prototype:

extern rtems_shell_cmd_t rtems_shell_OBJECT_Command;

6.2.16. driver - display the RTEMS device driver table¶

SYNOPSYS:

driver [major [major ...]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of Device Drivers currently active in the system.

If invoked with a set of major numbers as arguments, then just those Device Drivers are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of how to use driver:

SHLL [/] $ driver
Major      Entry points
------------------------------------------------------------------------------
0          init: [0x200256c];  control: [0x20024c8]
open: [0x2002518];  close: [0x2002504]
read: [0x20024f0];  write: [0x20024dc]
1          init: [0x20023fc];  control: [0x2002448]
open: [0x0];  close: [0x0]
read: [0x0];  write: [0x0]
SHLL [/] $

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_DRIVER to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_DRIVER when all shell commands have been configured.

PROGRAMMING INFORMATION:

The driver is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_driver(
    int    argc,
    char **argv
);

The configuration structure for the driver has the following prototype:

extern rtems_shell_cmd_t rtems_shell_DRIVER_Command;

6.2.17. dname - displays information about named drivers¶

SYNOPSYS:

dname

DESCRIPTION:

WARNING! This command does not appear to work as of 27 February 2008.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

NONE

EXAMPLES:

The following is an example of how to use dname:

EXAMPLE_TBD

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_DNAME to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_DNAME when all shell commands have been configured.

PROGRAMMING INFORMATION:

The dname is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_dname(
    int    argc,
    char **argv
);

The configuration structure for the dname has the following prototype:

extern rtems_shell_cmd_t rtems_shell_DNAME_Command;

6.2.18. pthread - display information about POSIX threads¶

SYNOPSYS:

pthread [id [id ...]]

DESCRIPTION:

When invoked with no arguments, this command prints information on the set of POSIX API threads currently active in the system.

If invoked with a set of ids as arguments, then just those objects are included in the information printed.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

This command is only available when the POSIX API is configured.

EXAMPLES:

The following is an example of how to use the task on an application with four POSIX threads:

SHLL [/] $ pthread
ID       NAME           PRI  STATE MODES   EVENTS    WAITID  WAITARG  NOTES
------------------------------------------------------------------------------
0b010002   Main           133 READY  P:T:nA    NONE   43010001 0x7b1148
0b010003   ISR            133 Wcvar  P:T:nA    NONE   43010003 0x7b1148
0b01000c                  133 READY  P:T:nA    NONE   33010002 0x7b1148
0b01000d                  133 Wmutex P:T:nA    NONE   33010002 0x7b1148

CONFIGURATION:

This command is part of the monitor commands which are always available in the shell.

PROGRAMMING INFORMATION:

This command is not directly available for invocation.