RTEMS 4.10.2 On-Line Library

RTEMS Specific Commands perioduse - print or reset per period usage

RTEMS Shell User's Guide

5.2.4: perioduse - print or reset per period usage

SYNOPSYS:

perioduse [-r]

DESCRIPTION:

This command may be used to print a statistics report on the rate monotonic periods in the application or to reset the rate monotonic period usage statistics. When invoked with the -r option, the usage statistics are reset.

EXIT STATUS:

This command returns 0 on success and non-zero if an error is encountered.

NOTES:

The granularity of the timing information reported is dependent upon the BSP and the manner in which RTEMS was built. In the default RTEMS configuration, if the BSP supports nanosecond granularity timestamps, then the information reported will be highly accurate. Otherwise, the accuracy of the information reported is limited by the clock tick quantum.

EXAMPLES:

The following is an example of how to use perioduse:

SHLL [/] $ perioduse
Period information by period
--- CPU times are in seconds ---
--- Wall times are in seconds ---
   ID     OWNER COUNT MISSED          CPU TIME                  WALL TIME
                                    MIN/MAX/AVG                MIN/MAX/AVG
0x42010001 TA1    502      0 0:000039/0:042650/0:004158 0:000039/0:020118/0:002848
0x42010002 TA2    502      0 0:000041/0:042657/0:004309 0:000041/0:020116/0:002848
0x42010003 TA3    501      0 0:000041/0:041564/0:003653 0:000041/0:020003/0:002814
0x42010004 TA4    501      0 0:000043/0:044075/0:004911 0:000043/0:020004/0:002814
0x42010005 TA5     10      0 0:000065/0:005413/0:002739 0:000065/1:000457/0:041058

                                    MIN/MAX/AVG                MIN/MAX/AVG
SHLL [/] $ perioduse -r
Resetting Period Usage information
SHLL [/] $ perioduse
--- CPU times are in seconds ---
--- Wall times are in seconds ---
   ID     OWNER COUNT MISSED          CPU TIME                  WALL TIME
                                    MIN/MAX/AVG                MIN/MAX/AVG
0x42010001 TA1      0      0
0x42010002 TA2      0      0
0x42010003 TA3      0      0
0x42010004 TA4      0      0
0x42010005 TA5      0      0

CONFIGURATION:

This command is included in the default shell command set. When building a custom command set, define CONFIGURE_SHELL_COMMAND_PERIODUSE to have this command included.

This command can be excluded from the shell command set by defining CONFIGURE_SHELL_NO_COMMAND_PERIODUSE when all shell commands have been configured.

PROGRAMMING INFORMATION:

The perioduse is implemented by a C language function which has the following prototype:

int rtems_shell_rtems_main_perioduse(
  int    argc,
  char **argv
);

The configuration structure for the perioduse has the following prototype:

extern rtems_shell_cmd_t rtems_shell_PERIODUSE_Command;

RTEMS Shell User's Guide